The Mer Wiki now uses your Mer user account and password (create account on https://bugs.merproject.org/)
Platform SDK and SB2
(→Nemo section consolidated) |
(→Example of building one of Nemo's RPM packages) |
||
(66 intermediate revisions by 15 users not shown) | |||
Line 1: | Line 1: | ||
The most straightforward way to use Scratchbox2 is within the Mer [[Platform SDK]]. | The most straightforward way to use Scratchbox2 is within the Mer [[Platform SDK]]. | ||
− | This page will go through the steps of using SB2 to compile a simple program. | + | This page will go through the steps of using SB2 to compile a simple program in a tutorial-like manner. |
= Prerequisites = | = Prerequisites = | ||
* A properly setup SDK | * A properly setup SDK | ||
− | * Scratchbox2 pre-installed (see [[# | + | * Scratchbox2 pre-installed (see [[Platform_SDK#Compiling_with_the_SDK|SB2 Installation]] if not) |
* Your home directory is in /home/<username> (otherwise see [[#Directory Mappings| directory mappings]]) | * Your home directory is in /home/<username> (otherwise see [[#Directory Mappings| directory mappings]]) | ||
Line 27: | Line 27: | ||
This gets: | This gets: | ||
− | sb2: Error: | + | sb2: Error: No target specified and none set as default, aborting. |
When sb2 runs it needs to know where to get header files and libraries and what architecture and cross-compiler to use. This is called a 'target'. SB2 can be configured to run against multiple named targets. | When sb2 runs it needs to know where to get header files and libraries and what architecture and cross-compiler to use. This is called a 'target'. SB2 can be configured to run against multiple named targets. | ||
− | = | + | = Setup a new target for sb2 = |
== Target Preparation == | == Target Preparation == | ||
A target is a rootfs that contains development files like headers, libraries and possibly programs. Notably it does *not* need to contain compilers, linkers etc. | A target is a rootfs that contains development files like headers, libraries and possibly programs. Notably it does *not* need to contain compilers, linkers etc. | ||
+ | |||
+ | You can either make your own or (eventually) download a target. | ||
+ | |||
+ | == Make your own target == | ||
+ | |||
+ | '''NOTE:''' this needs mer-core >= 0.20130124.1, check that with sdk-version cmd. | ||
Still running in the sdk we'll create a target in the recommended /srv/mer/targets/ area. | Still running in the sdk we'll create a target in the recommended /srv/mer/targets/ area. | ||
Line 41: | Line 47: | ||
sudo chown -R $USER /parentroot/srv/mer/targets | sudo chown -R $USER /parentroot/srv/mer/targets | ||
− | Now we need a kickstart file | + | Also make sure that /sbin is included in your PATH environment variable. |
+ | |||
+ | Now we need a kickstart file. We will generate this with mer-kickstarter | ||
+ | |||
+ | cd /tmp | ||
+ | sudo zypper install mer-kickstarter mer-kickstarter-configs | ||
+ | mer-kickstarter -c /usr/share/kickstarter-configs/mer-reference-images/00reference.yaml -e /usr/share/kickstarter-configs/mer-reference-images/ | ||
+ | |||
+ | You now have a large number of kickstart files - we're primarily interested in the mer-target-<arch> ones. | ||
+ | |||
+ | The .ks files created contain what is known as a 'token'; in this case it is the text @MER_RELEASE@. When running mic the --tokenmap option is used to provide a value. | ||
− | + | After the kickstart file is created the image build can be started | |
− | + | sudo mic create fs mer-target-armv7hl.ks -o /parentroot/srv/mer/targets --pkgmgr=zypp --arch=armv7hl --tokenmap=MER_RELEASE:latest | |
− | + | ||
− | + | Next we need to make sure the rootfs is all owned by the user. SB2 uses fakeroot when needed and won't work if the target has root-owned files. | |
+ | sudo chown -R $USER /parentroot/srv/mer/targets/mer-target-armv7hl/* | ||
− | + | Finally some commands (notably rpmbuild) need to know about your username/userid mapping so we'll add that. Make absolutely sure you are at the top of the sdkroot and don't use a leading / : | |
− | + | cd /parentroot/srv/mer/targets/mer-target-armv7hl/ | |
+ | grep :$(id -u): /etc/passwd >> etc/passwd | ||
+ | grep :$(id -g): /etc/group >> etc/group | ||
− | This target could be any suitable rootfs such as a Nemo or PA rootfs. | + | This target could be any suitable rootfs such as a Nemo or PA rootfs and there are some alternate targets presented lower down the page. |
− | == Target | + | == Initialize Target in SB2 == |
− | To tell SB2 about the target we use sb2-init which gives the target a name - in this case "mer- | + | To tell SB2 about the target we use sb2-init which gives the target a name - in this case "mer-target-armv7hl". |
'''IMPORTANT''' : You must change directory to the target rootfs before running sb2-init. | '''IMPORTANT''' : You must change directory to the target rootfs before running sb2-init. | ||
− | + | cd /parentroot/srv/mer/targets/mer-target-armv7hl | |
− | + | sb2-init -d -L "--sysroot=/" -C "--sysroot=/" -c /usr/bin/qemu-arm-dynamic -m sdk-build -n -N -t / mer-target-armv7hl /opt/cross/bin/armv7hl-meego-linux-gnueabi-gcc | |
Notes | Notes | ||
Line 67: | Line 85: | ||
* running sb2-init again with the same name will just change the values for that name - make sure each target is named uniquely. | * running sb2-init again with the same name will just change the values for that name - make sure each target is named uniquely. | ||
− | We now need to work around [https://bugs.merproject.org/show_bug.cgi?id=238 bug #238]: | + | We now need to work around [https://bugs.merproject.org/show_bug.cgi?id=238 bug #238] (note lack of leading /): |
− | + | echo -n "armv7hl-meego-linux" > etc/rpm/platform | |
Note that this may not affect all targets and will need an appropriate value for the target architecture until the bug is resolved. | Note that this may not affect all targets and will need an appropriate value for the target architecture until the bug is resolved. | ||
And prepare the target for installation (all these steps will eventually be handled by a target preparation script or similar): | And prepare the target for installation (all these steps will eventually be handled by a target preparation script or similar): | ||
− | + | sb2 -t mer-target-armv7hl -m sdk-install -R rpm --rebuilddb | |
− | + | sb2 -t mer-target-armv7hl -m sdk-install -R zypper ref --force | |
The target is now ready to be used by sb2. | The target is now ready to be used by sb2. | ||
+ | |||
+ | If zypper fails with "Cant open /var/run/zypp.pid in mode w" you can fix it with: | ||
+ | |||
+ | cd /srv/mer/targets/<target_name>/var | ||
+ | rm run && mkdir run | ||
= Compile the simple C program = | = Compile the simple C program = | ||
Again run: | Again run: | ||
− | + | sb2 -t mer-target-armv7hl gcc ~/src/hello.c -o ~/src/hello | |
This time: | This time: | ||
− | + | ~/src/hello.c:1:19: fatal error: stdio.h: No such file or directory | |
This is because the target has no development header files in it. | This is because the target has no development header files in it. | ||
Line 90: | Line 113: | ||
Note the important use of the "-m sdk-install" and the "-R". The -m tells sb2 to use a mapping mode that permit the updating of the target and -R tells sb2 to run as fake root. | Note the important use of the "-m sdk-install" and the "-R". The -m tells sb2 to use a mapping mode that permit the updating of the target and -R tells sb2 to run as fake root. | ||
− | + | cd /parentroot/srv/mer/targets/mer-target-armv7hl | |
− | + | sb2 -t mer-target-armv7hl -m sdk-install -R zypper in glibc-devel | |
You'll need to do this for any build requirements of your code. | You'll need to do this for any build requirements of your code. | ||
Line 107: | Line 130: | ||
-N : don't do localisation for the target | -N : don't do localisation for the target | ||
-t : the location of the build tools | -t : the location of the build tools | ||
− | mer- | + | mer-target-armv7hl : The name of the target |
/opt/cross/bin/armv7hl-meego-linux-gnueabi-gcc : the cross-compiler to use | /opt/cross/bin/armv7hl-meego-linux-gnueabi-gcc : the cross-compiler to use | ||
= Alternate targets = | = Alternate targets = | ||
+ | |||
+ | == Creating an SB2 Target for any (non-x86) Mer OBS package (draft) == | ||
+ | |||
+ | osc provides the ability to do a "local build" where it creates a chroot within the SDK suitable for building a package. | ||
+ | |||
+ | When SB2 is enabled on the OBS (as it is in the MeeGo public OBS) then it also creates a suitable SB2 'target'. | ||
+ | |||
+ | So checkout the package from OBS, start a local build, setup the SB2 target: | ||
+ | |||
+ | osc co PROJECT PACKAGE | ||
+ | cd PROJECT/PACKAGE | ||
+ | |||
+ | determine which repository/architecture to build for | ||
+ | osc repos | ||
+ | |||
+ | Then run a build | ||
+ | osc build --chroot-only REPO ARCH | ||
+ | |||
+ | Note the build root from the above command or use this to find it: | ||
+ | osc chroot | ||
+ | |||
+ | Check the directory of the osc chroot and use the ./target/ directory in there for your SB2 target: | ||
+ | |||
+ | cd CHROOT/target | ||
+ | sb2-init -L "--sysroot=/" -C "--sysroot=/" -c /usr/bin/qemu-arm-dynamic -m sdk-build -n -N -t / TARGETNAME /opt/cross/bin/armv7hl-meego-linux-gnueabi-gcc | ||
+ | |||
+ | (If you like you could move this to /srv/mer/targets/ before running the cd/sb2-init commands but then osc build wouldn't upgrade it anymore) | ||
+ | |||
+ | At this point you can go to your ~/src/package.git/ directory and run | ||
+ | |||
+ | sb2 -t TARGETNAME make | ||
+ | |||
+ | The advantage of this approach over a full rootfs target are that: | ||
+ | * it's smaller | ||
+ | * it uses the osc package cache so can be updated with smaller downloads | ||
+ | * it works with packages that are changing on the OBS (so can be run against branched projects) | ||
+ | * it's probably more suitable for working with other people and collaborating via the OBS | ||
+ | * the rootfs can be upgraded and packages added using osc (especially the -x option) | ||
+ | |||
+ | The disadvantages are | ||
+ | * it is currently more manual | ||
+ | * it only installs the development packages that are listed by the spec file as build-dependencies | ||
+ | * it's not as re-useable across multiple packages | ||
== N950 Nemo Mobile == | == N950 Nemo Mobile == | ||
+ | Nemo/N950 rootfs can be found at: http://releases.nemomobile.org/snapshots/ (choose the armv7hl-n950 images). | ||
+ | |||
To setup cross compiling for N950 (armv7hl) do the following inside the sdk chroot | To setup cross compiling for N950 (armv7hl) do the following inside the sdk chroot | ||
Line 119: | Line 187: | ||
Extract the Nemo N950 rootfs as a target and set file permissions: | Extract the Nemo N950 rootfs as a target and set file permissions: | ||
− | mkdir -p /srv/mer/targets/n950rootfs | + | sudo mkdir -p /srv/mer/targets/n950rootfs |
cd /srv/mer/targets/n950rootfs | cd /srv/mer/targets/n950rootfs | ||
sudo tar xjvf /path/to/nemo-n950-image.tar.bz2 | sudo tar xjvf /path/to/nemo-n950-image.tar.bz2 | ||
sudo chown -R $USER . | sudo chown -R $USER . | ||
+ | |||
+ | note: if you're doing this as the root user and not with sudo, remember to replace $USER with your regular username. | ||
=== Initialize scratchbox2 === | === Initialize scratchbox2 === | ||
Line 129: | Line 199: | ||
sb2-init -L "--sysroot=/" -C "--sysroot=/" -c /usr/bin/qemu-arm-dynamic -m sdk-build -n -N -t / nemo-n950 /opt/cross/bin/armv7hl-meego-linux-gnueabi-gcc | sb2-init -L "--sysroot=/" -C "--sysroot=/" -c /usr/bin/qemu-arm-dynamic -m sdk-build -n -N -t / nemo-n950 /opt/cross/bin/armv7hl-meego-linux-gnueabi-gcc | ||
− | The compiler should now work but you are still missing libraries to compile against. Install what you need into the n950 rootfs | + | '''Note:''' If you installed the mer-target-armv7hl target earlier, that will be your default target. If you, however, like the nemo-n950 to be your default target, add the '''-d''' switch to the command line above. |
+ | |||
+ | Notes | ||
+ | * some messages about "cannot find 'ld'" and "no gcc" are expected. | ||
+ | * running sb2-init again with the same name will just change the values for that name - make sure each target is named uniquely. | ||
+ | |||
+ | We now need to work around [https://bugs.merproject.org/show_bug.cgi?id=238 bug #238] (note lack of leading /): | ||
+ | echo -n "armv7hl-meego-linux" > etc/rpm/platform | ||
+ | Note that this may not affect all targets and will need an appropriate value for the target architecture until the bug is resolved. | ||
+ | |||
+ | The compiler should now work but you are still missing libraries to compile against. Install what you need into the n950 rootfs. For example: | ||
+ | |||
+ | sb2 -t nemo-n950 -m sdk-install -R ssu ur | ||
+ | sb2 -t nemo-n950 -m sdk-install -R zypper ref -f | ||
+ | sb2 -t nemo-n950 -m sdk-install -R zypper dup | ||
+ | sb2 -t nemo-n950 -m sdk-install -R zypper install gcc-c++ | ||
+ | |||
+ | Whenever you see message about dbus connection failed on sdk installs, just do 'i' for ignore. For example: | ||
+ | Installation of openssh-5.6p1-1.1.84 failed: | ||
+ | (with --nodeps --force) Error: Subprocess failed. Error: RPM failed: Failed to get D-Bus connection: No connection to service manager. | ||
+ | |||
+ | If zypper fails with "Cant open /var/run/zypp.pid in mode w" you can fix it with: | ||
− | + | cd /srv/mer/targets/n950rootfs/var | |
− | + | rm run && mkdir run | |
If the installation fails due to permission errors give your user write permissions to the places the packages are being installed and retry. After this you can compile for example a c hello world by | If the installation fails due to permission errors give your user write permissions to the places the packages are being installed and retry. After this you can compile for example a c hello world by | ||
Line 154: | Line 245: | ||
$ file hello | $ file hello | ||
hello: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.25, not stripped | hello: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.25, not stripped | ||
− | $ sb2 ./hello | + | $ sb2 -t nemo-n950 ./hello |
Hello | Hello | ||
Line 161: | Line 252: | ||
sb2 -t nemo-n950 make | sb2 -t nemo-n950 make | ||
− | == | + | === Example of building one of Nemo's RPM packages === |
− | + | Here's an example of building RPM of QmlCalc: | |
− | + | git clone https://github.com/nemomobile/qmlcalc.git | |
+ | cd qmlcalc/ | ||
+ | mb2 -t nemo-n950 build | ||
− | + | ==== Troubleshooting ==== | |
+ | If | ||
+ | .../armv7hl-meego-linux-gnueabi/bits/os_defines.h:40:22: fatal error: features.h: No such file or directory | ||
+ | then | ||
+ | sb2 -t mer-target-armv7hl -m sdk-install -Rzypper in glibc-devel | ||
+ | If | ||
+ | /var/tmp/rpm-tmp. .... : line 44: /usr/lib/rpm/meego/find-docs.sh: No such file or directory | ||
+ | then | ||
+ | sb2 -t mer-target-armv7hl -m sdk-install -R zypper in meego-rpm-config | ||
+ | |||
+ | If magic file issues: | ||
+ | error: magic_load failed: File 5.4 supports only version 7 magic files. `/usr/share/misc/magic.mgc' is version 10 | ||
+ | then | ||
+ | # Save the target magic.mgc file (just in case) and use the one from the MerSDK | ||
+ | mv /parentroot/srv/mer/targets/nemo-i486-vm-wayland_SB2/usr/share/misc/magic.mgc /parentroot/srv/mer/targets/nemo-i486-vm-wayland_SB2/usr/share/misc/magic.mgc.orig | ||
+ | cp /usr/share/misc/magic.mgc /parentroot/srv/mer/targets/nemo-i486-vm-wayland_SB2/usr/share/misc/magic.mgc | ||
+ | |||
+ | == Plasma Active == | ||
+ | |||
+ | Plasma Active can run on various devices, such as Nexus 7, the Flying Squirrel (in previous iteration - Vivaldi) and so on. | ||
+ | |||
+ | * Rootfs for PlasmaActive/Vivaldi can be found here (built 25 March 2012) - https://img.merproject.org/images/web/vgrade/6-20120325-173308/plasmaactive-armv7l-c71-devel-rootfs.tar.bz2 | ||
+ | Note that Vivaldi tablet is already obsolete, and Plasma Active project is shifting to other reference platform. | ||
+ | |||
+ | * Plasma Active rootfs for Asus Nexus 7 can be found at: http://download.kde.org/unstable/active/3.0/images/nexus7/plasma-active-nexus7-testing-mer-latest-2012-12-20.tar.bz2 | ||
+ | |||
+ | In the future there might be smaller rootfs releases, targeted specifically to be used with SDK and containing the minimized set of development tools. | ||
=== Setup target === | === Setup target === | ||
− | + | '''Important Note:''' review potential issues in the [[Platform_SDK_and_SB2#Target_Setup|mer-target-armv7hl target example]]. They apply to setting up other targets as well. | |
− | sudo mkdir -p /srv/mer/targets/plasmaactive- | + | Extract the PlasmaActive rootfs as a target and set file permissions (in this example we are taking a Nexus 7 tablet, where PA uses armv7hl build. For other targets and potential armv7l versions, adjust the instructions below accordingly: |
− | cd /srv/mer/targets/plasmaactive- | + | |
− | sudo tar xjvf | + | target_device='nexus7' |
+ | arch='armv7hl' | ||
+ | rootfs='/path/to/plasma-active-nexus7-testing-mer-latest-2012-12-20.tar.bz2' | ||
+ | sudo mkdir -p "/srv/mer/targets/plasmaactive-${target_device}-rootfs" | ||
+ | cd /srv/mer/targets/plasmaactive-${target_device}-rootfs | ||
+ | sudo tar xjvf $rootfs | ||
sudo chown -R $USER . | sudo chown -R $USER . | ||
=== Initialize scratchbox2 === | === Initialize scratchbox2 === | ||
+ | cd /srv/mer/targets/plasmaactive-${target_device}-rootfs | ||
+ | sb2-init -L "--sysroot=/" -C "--sysroot=/" -c /usr/bin/qemu-arm-dynamic -m sdk-build -n -N -t / plasmaactive-${target_device} /opt/cross/bin/${arch}-meego-linux-gnueabi-gcc | ||
− | + | === Install some tools === | |
− | + | sb2 -t plasmaactive-${target_device} -m sdk-install -R zypper refresh | |
− | + | sb2 -t plasmaactive-${target_device} -m sdk-install -R zypper install gcc-c++ | |
− | === | + | |
− | sb2 -m sdk-install -R zypper refresh | + | |
− | sb2 -m sdk-install -R zypper install gcc-c++ | + | |
=== Cross compilation === | === Cross compilation === | ||
Line 201: | Line 324: | ||
Compile it: | Compile it: | ||
− | sb2 g++ hello.cpp -o hello | + | sb2 -t plasmaactive-${target_device} g++ hello.cpp -o hello |
Run: | Run: | ||
− | sb2 ./hello | + | sb2 -t plasmaactive-${target_device} ./hello |
Hello World! | Hello World! | ||
Line 230: | Line 353: | ||
Additional entries can be made if your source lives elsewhere (eg /media or /data etc). | Additional entries can be made if your source lives elsewhere (eg /media or /data etc). | ||
+ | |||
+ | ==Using multiple targets== | ||
+ | You can use multiple targets with the SDK. Set up each target as described above. | ||
+ | To perform some action for a specific target add the -t option: <pre>sb2 -t <target> ...</pre> | ||
+ | To list all set targets: <pre>sb2-config -l</pre> | ||
+ | To set up a default target: <pre>sb2-config -d <target></pre> | ||
+ | |||
+ | ==Removing targets== | ||
+ | When targets are created the information about target is put to ~/.scratchbox2/ directory, so in order to remove target one can just remove directories from there: | ||
+ | rm -r ~/.scratchbox2/<target_name> | ||
[[Category:sdk]] | [[Category:sdk]] |
Latest revision as of 11:35, 23 May 2014
The most straightforward way to use Scratchbox2 is within the Mer Platform SDK. This page will go through the steps of using SB2 to compile a simple program in a tutorial-like manner.
Contents |
[edit] Prerequisites
- A properly setup SDK
- Scratchbox2 pre-installed (see SB2 Installation if not)
- Your home directory is in /home/<username> (otherwise see directory mappings)
[edit] Create a simple C program
We'll use ~/src/hello.c as the location of our code.
mkdir ~/src cat <<EOF >~/src/hello.c #include <stdio.h> int main(int argc, char **argv) { printf("Hello World\n"); return 0; } EOF
And now to compile it:
sb2 gcc ~/src/hello.c -o ~/src/hello
This gets:
sb2: Error: No target specified and none set as default, aborting.
When sb2 runs it needs to know where to get header files and libraries and what architecture and cross-compiler to use. This is called a 'target'. SB2 can be configured to run against multiple named targets.
[edit] Setup a new target for sb2
[edit] Target Preparation
A target is a rootfs that contains development files like headers, libraries and possibly programs. Notably it does *not* need to contain compilers, linkers etc.
You can either make your own or (eventually) download a target.
[edit] Make your own target
NOTE: this needs mer-core >= 0.20130124.1, check that with sdk-version cmd.
Still running in the sdk we'll create a target in the recommended /srv/mer/targets/ area.
sudo mkdir -p /parentroot/srv/mer/targets sudo chown -R $USER /parentroot/srv/mer/targets
Also make sure that /sbin is included in your PATH environment variable.
Now we need a kickstart file. We will generate this with mer-kickstarter
cd /tmp sudo zypper install mer-kickstarter mer-kickstarter-configs mer-kickstarter -c /usr/share/kickstarter-configs/mer-reference-images/00reference.yaml -e /usr/share/kickstarter-configs/mer-reference-images/
You now have a large number of kickstart files - we're primarily interested in the mer-target-<arch> ones.
The .ks files created contain what is known as a 'token'; in this case it is the text @MER_RELEASE@. When running mic the --tokenmap option is used to provide a value.
After the kickstart file is created the image build can be started
sudo mic create fs mer-target-armv7hl.ks -o /parentroot/srv/mer/targets --pkgmgr=zypp --arch=armv7hl --tokenmap=MER_RELEASE:latest
Next we need to make sure the rootfs is all owned by the user. SB2 uses fakeroot when needed and won't work if the target has root-owned files.
sudo chown -R $USER /parentroot/srv/mer/targets/mer-target-armv7hl/*
Finally some commands (notably rpmbuild) need to know about your username/userid mapping so we'll add that. Make absolutely sure you are at the top of the sdkroot and don't use a leading / :
cd /parentroot/srv/mer/targets/mer-target-armv7hl/ grep :$(id -u): /etc/passwd >> etc/passwd grep :$(id -g): /etc/group >> etc/group
This target could be any suitable rootfs such as a Nemo or PA rootfs and there are some alternate targets presented lower down the page.
[edit] Initialize Target in SB2
To tell SB2 about the target we use sb2-init which gives the target a name - in this case "mer-target-armv7hl".
IMPORTANT : You must change directory to the target rootfs before running sb2-init.
cd /parentroot/srv/mer/targets/mer-target-armv7hl sb2-init -d -L "--sysroot=/" -C "--sysroot=/" -c /usr/bin/qemu-arm-dynamic -m sdk-build -n -N -t / mer-target-armv7hl /opt/cross/bin/armv7hl-meego-linux-gnueabi-gcc
Notes
- some messages about "cannot find 'ld'" and "no gcc" are expected.
- running sb2-init again with the same name will just change the values for that name - make sure each target is named uniquely.
We now need to work around bug #238 (note lack of leading /):
echo -n "armv7hl-meego-linux" > etc/rpm/platform
Note that this may not affect all targets and will need an appropriate value for the target architecture until the bug is resolved.
And prepare the target for installation (all these steps will eventually be handled by a target preparation script or similar):
sb2 -t mer-target-armv7hl -m sdk-install -R rpm --rebuilddb sb2 -t mer-target-armv7hl -m sdk-install -R zypper ref --force
The target is now ready to be used by sb2.
If zypper fails with "Cant open /var/run/zypp.pid in mode w" you can fix it with:
cd /srv/mer/targets/<target_name>/var rm run && mkdir run
[edit] Compile the simple C program
Again run:
sb2 -t mer-target-armv7hl gcc ~/src/hello.c -o ~/src/hello
This time:
~/src/hello.c:1:19: fatal error: stdio.h: No such file or directory
This is because the target has no development header files in it.
We need to be at the target root (this is bug #239) and then we can install some basic header files: Note the important use of the "-m sdk-install" and the "-R". The -m tells sb2 to use a mapping mode that permit the updating of the target and -R tells sb2 to run as fake root.
cd /parentroot/srv/mer/targets/mer-target-armv7hl sb2 -t mer-target-armv7hl -m sdk-install -R zypper in glibc-devel
You'll need to do this for any build requirements of your code.
[edit] SB2 Detailed setup information
The sb2-init options mean:
-d : make this the default target -L : linker options -C : compiler options -c : which qemu to use -m : which mapping to use by default -n : don't build libtool -N : don't do localisation for the target -t : the location of the build tools mer-target-armv7hl : The name of the target /opt/cross/bin/armv7hl-meego-linux-gnueabi-gcc : the cross-compiler to use
[edit] Alternate targets
[edit] Creating an SB2 Target for any (non-x86) Mer OBS package (draft)
osc provides the ability to do a "local build" where it creates a chroot within the SDK suitable for building a package.
When SB2 is enabled on the OBS (as it is in the MeeGo public OBS) then it also creates a suitable SB2 'target'.
So checkout the package from OBS, start a local build, setup the SB2 target:
osc co PROJECT PACKAGE cd PROJECT/PACKAGE
determine which repository/architecture to build for
osc repos
Then run a build
osc build --chroot-only REPO ARCH
Note the build root from the above command or use this to find it:
osc chroot
Check the directory of the osc chroot and use the ./target/ directory in there for your SB2 target:
cd CHROOT/target sb2-init -L "--sysroot=/" -C "--sysroot=/" -c /usr/bin/qemu-arm-dynamic -m sdk-build -n -N -t / TARGETNAME /opt/cross/bin/armv7hl-meego-linux-gnueabi-gcc
(If you like you could move this to /srv/mer/targets/ before running the cd/sb2-init commands but then osc build wouldn't upgrade it anymore)
At this point you can go to your ~/src/package.git/ directory and run
sb2 -t TARGETNAME make
The advantage of this approach over a full rootfs target are that:
- it's smaller
- it uses the osc package cache so can be updated with smaller downloads
- it works with packages that are changing on the OBS (so can be run against branched projects)
- it's probably more suitable for working with other people and collaborating via the OBS
- the rootfs can be upgraded and packages added using osc (especially the -x option)
The disadvantages are
- it is currently more manual
- it only installs the development packages that are listed by the spec file as build-dependencies
- it's not as re-useable across multiple packages
[edit] N950 Nemo Mobile
Nemo/N950 rootfs can be found at: http://releases.nemomobile.org/snapshots/ (choose the armv7hl-n950 images).
To setup cross compiling for N950 (armv7hl) do the following inside the sdk chroot
[edit] Setup target
Extract the Nemo N950 rootfs as a target and set file permissions:
sudo mkdir -p /srv/mer/targets/n950rootfs cd /srv/mer/targets/n950rootfs sudo tar xjvf /path/to/nemo-n950-image.tar.bz2 sudo chown -R $USER .
note: if you're doing this as the root user and not with sudo, remember to replace $USER with your regular username.
[edit] Initialize scratchbox2
cd /srv/mer/targets/n950rootfs sb2-init -L "--sysroot=/" -C "--sysroot=/" -c /usr/bin/qemu-arm-dynamic -m sdk-build -n -N -t / nemo-n950 /opt/cross/bin/armv7hl-meego-linux-gnueabi-gcc
Note: If you installed the mer-target-armv7hl target earlier, that will be your default target. If you, however, like the nemo-n950 to be your default target, add the -d switch to the command line above.
Notes
- some messages about "cannot find 'ld'" and "no gcc" are expected.
- running sb2-init again with the same name will just change the values for that name - make sure each target is named uniquely.
We now need to work around bug #238 (note lack of leading /):
echo -n "armv7hl-meego-linux" > etc/rpm/platform
Note that this may not affect all targets and will need an appropriate value for the target architecture until the bug is resolved.
The compiler should now work but you are still missing libraries to compile against. Install what you need into the n950 rootfs. For example:
sb2 -t nemo-n950 -m sdk-install -R ssu ur sb2 -t nemo-n950 -m sdk-install -R zypper ref -f sb2 -t nemo-n950 -m sdk-install -R zypper dup sb2 -t nemo-n950 -m sdk-install -R zypper install gcc-c++
Whenever you see message about dbus connection failed on sdk installs, just do 'i' for ignore. For example:
Installation of openssh-5.6p1-1.1.84 failed: (with --nodeps --force) Error: Subprocess failed. Error: RPM failed: Failed to get D-Bus connection: No connection to service manager.
If zypper fails with "Cant open /var/run/zypp.pid in mode w" you can fix it with:
cd /srv/mer/targets/n950rootfs/var rm run && mkdir run
If the installation fails due to permission errors give your user write permissions to the places the packages are being installed and retry. After this you can compile for example a c hello world by
cd cat << "EOF" > hello.c #include <stdio.h> int main(int argc, char **argv) { printf("Hello\n"); return 0; } EOF
To run a simple compile, tell sb2 what target to use (ie the name used in the sb2-init):
sb2 -t nemo-n950 gcc hello.c -o hello
Verify that the compilation worked
$ file hello hello: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.25, not stripped $ sb2 -t nemo-n950 ./hello Hello
More typically you'll use
sb2 -t nemo-n950 make
[edit] Example of building one of Nemo's RPM packages
Here's an example of building RPM of QmlCalc:
git clone https://github.com/nemomobile/qmlcalc.git cd qmlcalc/ mb2 -t nemo-n950 build
[edit] Troubleshooting
If
.../armv7hl-meego-linux-gnueabi/bits/os_defines.h:40:22: fatal error: features.h: No such file or directory
then
sb2 -t mer-target-armv7hl -m sdk-install -Rzypper in glibc-devel
If
/var/tmp/rpm-tmp. .... : line 44: /usr/lib/rpm/meego/find-docs.sh: No such file or directory
then
sb2 -t mer-target-armv7hl -m sdk-install -R zypper in meego-rpm-config
If magic file issues:
error: magic_load failed: File 5.4 supports only version 7 magic files. `/usr/share/misc/magic.mgc' is version 10
then
# Save the target magic.mgc file (just in case) and use the one from the MerSDK mv /parentroot/srv/mer/targets/nemo-i486-vm-wayland_SB2/usr/share/misc/magic.mgc /parentroot/srv/mer/targets/nemo-i486-vm-wayland_SB2/usr/share/misc/magic.mgc.orig cp /usr/share/misc/magic.mgc /parentroot/srv/mer/targets/nemo-i486-vm-wayland_SB2/usr/share/misc/magic.mgc
[edit] Plasma Active
Plasma Active can run on various devices, such as Nexus 7, the Flying Squirrel (in previous iteration - Vivaldi) and so on.
- Rootfs for PlasmaActive/Vivaldi can be found here (built 25 March 2012) - https://img.merproject.org/images/web/vgrade/6-20120325-173308/plasmaactive-armv7l-c71-devel-rootfs.tar.bz2
Note that Vivaldi tablet is already obsolete, and Plasma Active project is shifting to other reference platform.
- Plasma Active rootfs for Asus Nexus 7 can be found at: http://download.kde.org/unstable/active/3.0/images/nexus7/plasma-active-nexus7-testing-mer-latest-2012-12-20.tar.bz2
In the future there might be smaller rootfs releases, targeted specifically to be used with SDK and containing the minimized set of development tools.
[edit] Setup target
Important Note: review potential issues in the mer-target-armv7hl target example. They apply to setting up other targets as well.
Extract the PlasmaActive rootfs as a target and set file permissions (in this example we are taking a Nexus 7 tablet, where PA uses armv7hl build. For other targets and potential armv7l versions, adjust the instructions below accordingly:
target_device='nexus7' arch='armv7hl' rootfs='/path/to/plasma-active-nexus7-testing-mer-latest-2012-12-20.tar.bz2' sudo mkdir -p "/srv/mer/targets/plasmaactive-${target_device}-rootfs" cd /srv/mer/targets/plasmaactive-${target_device}-rootfs sudo tar xjvf $rootfs sudo chown -R $USER .
[edit] Initialize scratchbox2
cd /srv/mer/targets/plasmaactive-${target_device}-rootfs sb2-init -L "--sysroot=/" -C "--sysroot=/" -c /usr/bin/qemu-arm-dynamic -m sdk-build -n -N -t / plasmaactive-${target_device} /opt/cross/bin/${arch}-meego-linux-gnueabi-gcc
[edit] Install some tools
sb2 -t plasmaactive-${target_device} -m sdk-install -R zypper refresh sb2 -t plasmaactive-${target_device} -m sdk-install -R zypper install gcc-c++
[edit] Cross compilation
Create some source: hello.cpp:
#include <iostream> int main(int argc, char* argv[]) { std::cout << "Hello World!\n"; return 0; }
Compile it:
sb2 -t plasmaactive-${target_device} g++ hello.cpp -o hello
Run:
sb2 -t plasmaactive-${target_device} ./hello Hello World!
Check architecture:
file hello hello: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.25, not stripped
[edit] Additional Notes
[edit] Installation
If your SDK did not have the SB2 tools installed then you can do:
sudo zypper ar http://releases.merproject.org/releases/latest/builds/i486/cross mer-cross-tools sudo zypper ref sudo zypper in sdk-sb2-config qemu-usermode mpc cross-armv6l-gcc cross-armv6l-binutils cross-armv7l-gcc cross-armv7l-binutils cross-mipsel-gcc cross-mipsel-binutils cross-armv7hl-gcc cross-armv7hl-binutils
[edit] Directory Mappings
SB2 uses a sophisticated file mapping system to access the right tools and the right source code. The definitions are stored in /usr/share/scratchbox2/modes/sdk-build/fs_rules.lua
The current SDK definitions recognises a few filesystems:
/home /mer /maemo /everything
Additional entries can be made if your source lives elsewhere (eg /media or /data etc).
[edit] Using multiple targets
You can use multiple targets with the SDK. Set up each target as described above.
To perform some action for a specific target add the -t option:sb2 -t <target> ...To list all set targets:
sb2-config -lTo set up a default target:
sb2-config -d <target>
[edit] Removing targets
When targets are created the information about target is put to ~/.scratchbox2/ directory, so in order to remove target one can just remove directories from there:
rm -r ~/.scratchbox2/<target_name>