Adaptations/libhybris/Install SailfishOS for jfltexx

Revision as of 10:27, 26 June 2016

Notes for installing Sailfish OS on the Samsung Galaxy S4 GT-I9505 LTE (jfltexx).

Hardware Support

Status

Things that don't work

• Jolla Store (Harbour) doesn't work. Do not sign in with Jolla account.
• Voicecall: receiving calls works properly (along with Speaker, Pad and Mic buttons) / making calls fails with 3 tone signal.
• Camera: only front camera photo works. back camera photo + any camera video fails.
• Mobile Internet: intermittent feature, between reboots:
  • setting PIN code for the SIM card seems to help;
  • additionally, try giving it 10-15sec pause once the SIM inserted screen shows up, and then enter the PIN to unlock.
• Home key not working.
• Headphone jack.
• Screen going to suspend mode not working.

Things that work

• Sensors
• GPS
• SMS
• Audio
• Bluetooth: now working, but with quirks. Checkout release notes for v0.0.9

Image Building

useful links

• HADK Porting Guide - used 1.1.1 (outdated, check out 1.1.2)
• Simon Van der Veldt's Github repos
• Cyanogenmod jfltexx Page
• Cyanogenmod jfltexx Installation
• Cyanogenmod jfltexx Releases
• Adaptations/libhybris

• cm-12.1-20151117-SNAPSHOT-YOG7DAO1JN-jfltexx.zip
• cm-12.1-20151117-SNAPSHOT-YOG7DAO1JN-jfltexx-recovery.img
• I9505XXUHOB7_I9505YXYHOB5_BTU.zip
• Odin3_v3.10.7.zip
• heimdall-suite-1.4.0-win32.zip

build notes

The notes below follow the HADK Porting Guide (v1.1.1), which has recently been updated to v1.1.2)

1 OVERVIEW -> Proceed as described;

2 PREREQUISITES -> Proceed as described;

3 PREPARING YOUR DEVICE -> Proceed as described;

4.1 Setting up required environment variables

$HOME/.hadk.env

export MER_ROOT="/home/<user>/mer"
export ANDROID_ROOT="$MER_ROOT/android/droid"
export VENDOR="samsung"
export DEVICE="jfltexx"
#ARCH conflicts with kernel build
export PORT_ARCH="armv7hl"

Proceed as described;

4.2 Setup the Mer SDK -> Proceed as described;

4.3 Preparing the Mer SDK -> Proceed as described;

4.4 Setting up an Android Build Environment

4.4.1 Downloading and Unpacking Ubuntu Chroot -> Proceed as described;

4.4.2 Entering Ubuntu Chroot -> Proceed as described;

5.1 Checking out CyanogenMod Source

repo init -u git://github.com/mer-hybris/android.git -b hybris-12.1

Proceed as described;

5.2 Device repos

$ANDROID_ROOT/.repo/local_manifests/jfltexx.xml

<?xml version="1.0" encoding="UTF-8"?>
<manifest>
    <project path="device/samsung/jflte" name="CyanogenMod/android_device_samsung_jfltexx" revision="cm-12.1" />
    <project path="device/samsung/jf-common" name="Cyanogenmod/android_device_samsung_jf-common" revision="cm-12.1" />
    <project path="device/samsung/msm8960-common" name="Cyanogenmod/android_device_samsung_msm8960-common" revision="cm-12.1" />
    <project path="device/samsung/qcom-common" name="Cyanogenmod/android_device_samsung_qcom-common" revision="cm-12.1" />
    <project path="hardware/samsung" name="Cyanogenmod/android_hardware_samsung" revision="cm-12.1" />
    <project path="kernel/samsung/jf" name="Cyanogenmod/android_kernel_samsung_jf" revision="cm-12.1" />
    <project path="rpm" name="wickwire/droid-hal-jfltexx" revision="master" sync-s="true" />
    <project path="hybris/droid-configs" name="wickwire/droid-config-jfltexx" revision="master" sync-s="true" />
    <project path="hybris/droid-hal-version-jfltexx" name="wickwire/droid-hal-version-jfltexx" revision="master" sync-s="true" />
    <project path="mlehtima/audioflingerglue" name="mlehtima/audioflingerglue" revision="master" sync-s="true" />
    <remove-project name="mer-hybris/hybris-boot" />
    <project path="hybris/hybris-boot" name="wickwire/hybris-boot" revision="wickwire-jfltexx" />
</manifest>

Proceed as described;

5.3 Configure Mountpoint Information

$ANDROID_ROOT/hybris/hybris-boot/fixup-mountpoints should already have this additional block - so, nothing to do here:

    "jfltexx")
       sed -i \
            -e 's block/platform/msm_sdcc.1/by-name/aboot mmcblk0p6 ' \
            -e 's block/platform/msm_sdcc.1/by-name/apnhlos mmcblk0p1 ' \
            -e 's block/platform/msm_sdcc.1/by-name/backup mmcblk0p23 ' \
            -e 's block/platform/msm_sdcc.1/by-name/boot mmcblk0p20 ' \
            -e 's block/platform/msm_sdcc.1/by-name/cache mmcblk0p18 ' \
            -e 's block/platform/msm_sdcc.1/by-name/carrier mmcblk0p28 ' \
            -e 's block/platform/msm_sdcc.1/by-name/efs mmcblk0p10 ' \
            -e 's block/platform/msm_sdcc.1/by-name/fota mmcblk0p22 ' \
            -e 's block/platform/msm_sdcc.1/by-name/fsg mmcblk0p24 ' \
            -e 's block/platform/msm_sdcc.1/by-name/hidden mmcblk0p27 ' \
            -e 's block/platform/msm_sdcc.1/by-name/m9kefs1 mmcblk0p13 ' \
            -e 's block/platform/msm_sdcc.1/by-name/m9kefs2 mmcblk0p14 ' \
            -e 's block/platform/msm_sdcc.1/by-name/m9kefs3 mmcblk0p15 ' \
            -e 's block/platform/msm_sdcc.1/by-name/mdm mmcblk0p2 ' \
            -e 's block/platform/msm_sdcc.1/by-name/modemst1 mmcblk0p11 ' \
            -e 's block/platform/msm_sdcc.1/by-name/modemst2 mmcblk0p12 ' \
            -e 's block/platform/msm_sdcc.1/by-name/pad mmcblk0p9 ' \
            -e 's block/platform/msm_sdcc.1/by-name/param mmcblk0p19 ' \
            -e 's block/platform/msm_sdcc.1/by-name/persdata mmcblk0p26 ' \
            -e 's block/platform/msm_sdcc.1/by-name/persist mmcblk0p17 ' \
            -e 's block/platform/msm_sdcc.1/by-name/recovery mmcblk0p21 ' \
            -e 's block/platform/msm_sdcc.1/by-name/rpm mmcblk0p7 ' \
            -e 's block/platform/msm_sdcc.1/by-name/sbl1 mmcblk0p3 ' \
            -e 's block/platform/msm_sdcc.1/by-name/sbl2 mmcblk0p4 ' \
            -e 's block/platform/msm_sdcc.1/by-name/sbl3 mmcblk0p5 ' \
            -e 's block/platform/msm_sdcc.1/by-name/ssd mmcblk0p25 ' \
            -e 's block/platform/msm_sdcc.1/by-name/system mmcblk0p16 ' \
            -e 's block/platform/msm_sdcc.1/by-name/tz mmcblk0p8 ' \
            -e 's block/platform/msm_sdcc.1/by-name/userdata mmcblk0p29 ' \
            "$@"
        ;;

5.4 Building Relevant Bits of CyanogenMod

using defconfig from: arch/arm/configs/cyanogen_jf_defconfig

Before executing make -j4 hybris-hal, perform actions from http://piratepad.net/hadk-faq lines 66-114 in order to get GSM calls working:

cd $ANDROID_ROOT
cd /external/sonivox
git checkout 047330f1c245bcb3641856a6adabfc344d6e3c36
cd $ANDROID_ROOT
cd frameworks/av
git checkout 25be9ac20db51044e1b09ca67906355e4f328d48
cd ~/mer/android/droid/kernel/samsung/jf

(check that the active branch is jfltexx)

make libaudioflingerglue miniafservice

those packages should build ok, and then do

make hybris-hal

and then do

hybris/mer-kernel-check/mer_verify_kernel_config ./out/target/product/$DEVICE/obj/KERNEL_OBJ/.config | egrep -e 'ERROR|WARNING'
WARNING: CONFIG_SCHEDSTATS is invalid
WARNING: CONFIG_SCHED_DEBUG is invalid
WARNING: CONFIG_WATCHDOG_NOWAYOUT is invalid

those 3 warnings only and no errors should be ok

6 SETTING UP SCRATCHBOX2 TARGET -> Proceed as described;

7.1 Creating Repositories for a New Device -> the files for this part should already be available from the local_manifest, nothing to do

7.2.1 Building the droid-hal-device packages:

add the following repo to the merSDK:

ssu ar testing http://repo.merproject.org/obs/home:/mal:/testing/sailfishos_latest_armv7hl/
zypper ref and then zypper dup --from testing

Proceed as described;

Important note: if the process hangs at ngfd-plugin-droid-vibrator, abort the script and manually build the package:

PKG=ngfd-plugin-droid-vibrator
cd ~/mer/devel/mer-hybris/$PKG
mb2 -s rpm/ngfd-plugin-droid-vibrator.spec -t samsung-jfltexx-armv7hl build
mv RPMS/*.rpm $ANDROID_ROOT/droid-local-repo/$DEVICE/$PKG
sb2 -t $VENDOR-$DEVICE-armv7hl -R -msdk-install zypper ref

then resume build_packages.sh

When done, continue with http://piratepad.net/hadk-faq, follow the steps between lines 79-114:

(for the load-module part, check out 14.8 PulseAudio Droid Modules in the HADK Porting Guide)

cd $ANDROID_ROOT

(create the two files below)

pack_source_af.sh

fold=audioflingerglue-0.0.1
rm -rf $fold
mkdir $fold

mkdir -p $fold/out/target/product/${DEVICE}/system/lib
mkdir -p $fold/out/target/product/${DEVICE}/system/bin
mkdir -p $fold/external/audioflingerglue

cp ./out/target/product/${DEVICE}/system/lib/libaudioflingerglue.so $fold/out/target/product/${DEVICE}/system/lib/
cp ./out/target/product/${DEVICE}/system/bin/miniafservice $fold/out/target/product/${DEVICE}/system/bin/
cp ./external/audioflingerglue/*.h $fold/external/audioflingerglue/
cp ./external/audioflingerglue/hybris.c $fold/external/audioflingerglue/

tar -cjvf ${fold}.tgz $fold

audioflingerglue.spec

%define strip /bin/true
%define __requires_exclude  ^.*$
%define __find_requires     %{nil}
%global debug_package       %{nil}
%define __provides_exclude_from ^.*$
%define device_rpm_architecture_string armv7hl
%define _target_cpu %{device_rpm_architecture_string}

Name:          audioflingerglue
Summary:       Android AudioFlinger glue library
Version:       0.0.1
Release:       1
Group:         System/Libraries
License:       ASL 2.0
#BuildRequires: ubu-trusty
#BuildRequires: sudo-for-abuild
#BuildRequires: droid-bin-src-full
Source0:       %{name}-%{version}.tgz
AutoReqProv:   no

%description
%{summary}

%package       devel
Summary:       audioflingerglue development headers
Group:         System/Libraries
Requires:      audioflingerglue = %{version}-%{release}
BuildArch:     noarch

%description   devel
%{summary}

%prep

%if %{?device_rpm_architecture_string:0}%{!?device_rpm_architecture_string:1}
echo "device_rpm_architecture_string is not defined"
exit -1
%endif

%setup

#sudo chown -R abuild:abuild /home/abuild/src/droid/
#mv /home/abuild/src/droid/* .
#mkdir -p external
#pushd external
#tar -zxf %SOURCE0
#mv audioflingerglue* audioflingerglue
#popd
%build
pwd
ls 
tar -xvf %name-%version.tgz
%install

mkdir -p $RPM_BUILD_ROOT/%{_libexecdir}/droid-hybris/system/lib/
mkdir -p $RPM_BUILD_ROOT/%{_libexecdir}/droid-hybris/system/bin/
mkdir -p $RPM_BUILD_ROOT/%{_includedir}/audioflingerglue/
mkdir -p $RPM_BUILD_ROOT/%{_datadir}/audioflingerglue/
pushd %name-%version
cp out/target/product/*/system/lib/libaudioflingerglue.so \
    $RPM_BUILD_ROOT/%{_libexecdir}/droid-hybris/system/lib/

cp out/target/product/*/system/bin/miniafservice \
    $RPM_BUILD_ROOT/%{_libexecdir}/droid-hybris/system/bin/

cp external/audioflingerglue/audioflingerglue.h $RPM_BUILD_ROOT/%{_includedir}/audioflingerglue/
cp external/audioflingerglue/hybris.c $RPM_BUILD_ROOT/%{_datadir}/audioflingerglue/

popd
%files
%defattr(-,root,root,-)
%{_libexecdir}/droid-hybris/system/lib/libaudioflingerglue.so
%{_libexecdir}/droid-hybris/system/bin/miniafservice

%files devel
%defattr(-,root,root,-)
%{_includedir}/audioflingerglue/*.h
%{_datadir}/audioflingerglue/hybris.c 

7.2.2 Troubleshoot errors from build_packages.sh -> Shouldn't be anything to do here;

8.1 Additional Packages for Hardware Adaptation -> Shouldn't be anything to do here;

8.2 Creating and Configuring the Kickstart File:

Proceed as described - and then add mal- repo to tmp/$KS (watch out for any typos):

HA_REPO="repo --name=adaptation0-$DEVICE-@RELEASE@"
KS="Jolla-@RELEASE@-$DEVICE-@ARCH@.ks"

##### older lines, kept for posterity and because sed is cool ##### 
#sed -e "s|^$HA_REPO.*$|$HA_REPO --baseurl=file://$ANDROID_ROOT/droid-local-repo/$DEVICE|" $ANDROID_ROOT/hybris/droid-configs/installroot/usr/share/kickstarts/$KS > \
tmp/$KS
#repo --name=testing2 --baseurl=http://repo.merproject.org/obs/home:/mal:/testing2/sailfishos_latest_armv7hl
#repo --name=common --baseurl=http://repo.merproject.org/obs/nemo:/testing:/hw:/common/sailfish_latest_armv7hl
#sed -e "s|^$HA_REPO.*$|$HA_REPO --baseurl=file://$ANDROID_ROOT/droid-local-repo/$DEVICE|;s|^repo --name=jolla-@RELEASE@.*|& \nrepo --name=testing2 \
--baseurl=http://repo.merproject.org/obs/home:/mal:/testing2/sailfishos_latest_armv7hl\nrepo --name=common \
--baseurl=http://repo.merproject.org/obs/nemo:/testing:/hw:/common/sailfish_latest_armv7hl|" \
$ANDROID_ROOT/hybris/droid-configs/installroot/usr/share/kickstarts/$KS > tmp/$KS
##### older lines, kept for posterity and because sed is cool #####

sed -e "s|^$HA_REPO.*$|$HA_REPO --baseurl=file://$ANDROID_ROOT/droid-local-repo/$DEVICE|;s|^repo --name=jolla-@RELEASE@.*|& \nrepo --name=common \
--baseurl=http://repo.merproject.org/obs/nemo:/testing:/hw:/common/sailfish_latest_armv7hl|" \
$ANDROID_ROOT/hybris/droid-configs/installroot/usr/share/kickstarts/$KS > tmp/$KS

8.3.1 Making local repo aware of patterns -> Proceed as described;

8.4 Building the Image with MIC

cd $ANDROID_ROOT
hybris/droid-configs/droid-configs-device/helpers/process_patterns.sh

Proceed as described;

RELEASE=2.0.1.11
EXTRA_NAME=-wickwire-005-devel
sudo mic create fs --arch $PORT_ARCH --tokenmap=ARCH:$PORT_ARCH,RELEASE:$RELEASE,EXTRA_NAME:$EXTRA_NAME --record-pkgs=name,url \
--outdir=sfe-$DEVICE-$RELEASE$EXTRA_NAME --pack-to=sfe-$DEVICE-$RELEASE$EXTRA_NAME.tar.bz2 $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks

Installation

Requirements for installation

• Base Android zip: CyanogenMod download
• Latest Sailfish OS release: (newest directory and then the zip)
• Computer with adb and fastboot installed
• Patience and luck

Installation steps

• Install Android base zip by following instructions: CyanogenMod jfltexx Page
• Install the Sailfish OS zip on top of that Android base
• Reboot

Report bugs

• Software-related bugs (Sailfish OS): first search in https://together.jolla.com. If not found, add your question and tag with "porting"
• App bugs (e.g. an app doesn't scale well on different screens): contact its developer
• Problems which depend on hardware: search existing http://bit.ly/port-bugs; add new http://bit.ly/port-new-bug
• Please do not contact Jolla Care, Jolla Developer Care or phone's maker (e.g. LG, OnePlus, Google), as this is the Sailfish OS community's build for other phones
• For hot discussions about bleeding edge issues, welcome to this xda thread :)