Latest revision as of 21:10, 20 March 2013

Work in progress don't use

[edit] Install Sailfish SDK Emulator on ExoPC

This page has instructions on how to install Sailfish SDK emulator on your ExoPc

http://www.youtube.com/watch?v=UEgdW3KSxkM

[edit] Install Steps

Extract root filesystem from emulator virtualbox image

VBoxManage internalcommands converttoraw sailfishos.vdi sailfish.raw

Copy to flash key

sudo dd if=sailfish.raw of=/dev/sd* bs=4M
sync

Mount flash key
Edit /boot/extlinux/extlinux.conf to boot from sdb1 and add rootwait
Place in Exo and boot, press BBS button on screen and select flash key
Ctrl/Alt F2 - Login root/nemo here are our steps for your reference. (If Ctrl/Alt F2 doesn't work, try with left ctrl and alt buttons)
Enable WIFI:

cd /usr/lib/connman/test
./test-connman enable wifi

Run simple-agent, e.g. the network name(SSID) you want to connect is test123 and password is abcd123

./simple-agent Name=test123 Passphrase=abcd123

open another terminal:

./test-connman list

will list the network name and service name like this : test123 {wifi_123456_123456abcd_managed_wpa }
If test-connman doesn't list anything, you can try

./test-connman scan

connect to wifi

./test-connman connect wifi_123456_123456abcd_managed_wpa

edit sshd to allow remote login
install x86-generic adaptation files from https://build.merproject.org/project/show?project=home%3Avgrade%3Abranches%3Anemo%3Adevel%3Ahw%3Ax86-common

zypper ar http://repo.merproject.org//obs/home:/vgrade:/branches:/nemo:/devel:/hw:/x86-common/latest_i586/home:vgrade:branches:nemo:devel:hw:x86-common.repo
zypper in mesa-x86-generic-9.0.2
zypper in xorg-x11-drv-intel-2.21.3

remove egl_gallium.so and st.so from /usr/lib/egl
Edit to /usr/lib/systemd/user/lipstick.service to add Environment=QT_DEFAULT_RUNTIME_SYSTEM=
Edit to /var/lib/environment/nemo/50-jolla-ui to have following vars

EGL_PLATFORM=x11
EGL_DRIVER=egl_dri2
MCOMPOSITOR_USE_TFP=1

Set content of /etc/X11/xorg.conf.d/x86-vm.conf to :

Section "Monitor"
Identifier "Default Monitor"
HorizSync 30-100
VertRefresh 20-160
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Default Monitor"
DefaultDepth 24 
SubSection "Display"
# Viewport 0 0
Depth 24
EndSubsection
EndSection
Section "Device"
Identifier "Videocard0"
Driver "intel"
Option "AccelMethod" "sna"
EndSection
Section "Module"
Load "glx"
Load "dri"
EndSection
Section "DRI"
Mode 0666
EndSection

Edit /usr/lib/qt4/imports/Sailfish/silica/ApplicationWindow.qml to se width/height 1366/768

//width: _transpose ? screen.height : screen.width
//height: _transpose ? screen.width : screen.height
width: 1366
height: 768

To make display work in portrait mode execute following command (while logged in as user "nemo")

gconftool-2 --set /desktop/jolla/components/screen_rotation_angle --type int 90

Sailfish/Exopc

Latest revision as of 21:10, 20 March 2013

[edit] Install Sailfish SDK Emulator on ExoPC

[edit] Install Steps

Views

Personal tools

Navigation

Search

Tools

@@ Line 1: / Line 1: @@
-= Install Sailfish SDK Emulator =
+Work in progress don't use
+= Install Sailfish SDK Emulator on ExoPC =
 This page has instructions on how to install Sailfish SDK emulator on your ExoPc
+* http://www.youtube.com/watch?v=UEgdW3KSxkM
 == Install Steps ==
@@ Line 11: / Line 15: @@
   sync
 * Mount flash key
-* Edit /boot/extlinux/extlinux.com to boot from sdb1
+* Edit /boot/extlinux/extlinux.conf to boot from sdb1 and add rootwait
- mv x86-vm.conf x86-exopc.conf
-* Change resolution to 1366 768
 * Place in Exo and boot, press BBS button on screen and select flash key
-* follow https://wiki.merproject.org/wiki/Minimal/Networking
+* Ctrl/Alt F2 - Login root/nemo here are our steps for your reference. (If Ctrl/Alt F2 doesn't work, try with left ctrl and alt buttons)
+* Enable WIFI:
+ cd /usr/lib/connman/test
+ ./test-connman enable wifi
+* Run simple-agent, e.g. the network name(SSID) you want to connect is test123 and password is abcd123
+ ./simple-agent Name=test123 Passphrase=abcd123
+* open another terminal:
+ ./test-connman list
+* will list the network name and service name like this : test123 {wifi_123456_123456abcd_managed_wpa }
+* If test-connman doesn't list anything, you can try
+ ./test-connman scan
+* connect to wifi
+ ./test-connman connect wifi_123456_123456abcd_managed_wpa
+* edit sshd to allow remote login
+* install x86-generic adaptation files from https://build.merproject.org/project/show?project=home%3Avgrade%3Abranches%3Anemo%3Adevel%3Ahw%3Ax86-common
+ zypper ar http://repo.merproject.org//obs/home:/vgrade:/branches:/nemo:/devel:/hw:/x86-common/latest_i586/home:vgrade:branches:nemo:devel:hw:x86-common.repo
+ zypper in mesa-x86-generic-9.0.2
+ zypper in xorg-x11-drv-intel-2.21.3
+* remove egl_gallium.so and st.so from /usr/lib/egl
+* Edit to /usr/lib/systemd/user/lipstick.service to add Environment=QT_DEFAULT_RUNTIME_SYSTEM=
+* Edit to /var/lib/environment/nemo/50-jolla-ui to have following vars
+ EGL_PLATFORM=x11
+ EGL_DRIVER=egl_dri2
+ MCOMPOSITOR_USE_TFP=1
+* Set content of /etc/X11/xorg.conf.d/x86-vm.conf to :
+ Section "Monitor"
+ Identifier "Default Monitor"
+ HorizSync 30-100
+ VertRefresh 20-160
+ EndSection
+ Section "Screen"
+ Identifier "Default Screen"
+ Monitor "Default Monitor"
+ DefaultDepth 24
+ SubSection "Display"
+ # Viewport 0 0
+ Depth 24
+ EndSubsection
+ EndSection
+ Section "Device"
+ Identifier "Videocard0"
+ Driver "intel"
+ Option "AccelMethod" "sna"
+ EndSection
+ Section "Module"
+ Load "glx"
+ Load "dri"
+ EndSection
+ Section "DRI"
+ Mode 0666
+ EndSection
+* Edit /usr/lib/qt4/imports/Sailfish/silica/ApplicationWindow.qml to se width/height 1366/768
+ //width: _transpose ? screen.height : screen.width
+ //height: _transpose ? screen.width : screen.height
+ width: 1366
+ height: 768
+* To make display work in portrait mode execute following command (while logged in as user "nemo")
+ gconftool-2 --set /desktop/jolla/components/screen_rotation_angle --type int 90