The Mer Wiki now uses your Mer user account and password (create account on https://bugs.merproject.org/)

Building Sailfish OS for Nexus 5

From Mer Wiki
Revision as of 10:05, 24 July 2014 by Alin (Talk | contribs)

Jump to: navigation, search

Download the HADK documentation from http://releases.sailfishos.org/sfa-ea/2014-07-21_SailfishOSHardwareAdaptationDevelopmentKit.pdf

This document mentions configurations required to build Sailfish OS for Nexus 5 (hammerhead). HADK should be followed as it is and this document should be referred only to learn about build configurations specific to Nexus 5.

HADK mentions references to CM 10.1 while Nexus 5 is based on CM 11. All the steps carried out in HADK should be in context of CM 11 only.

Contents

Chapter 3

Install CM 11 instead of CM 10.1 on your device and test the functionality as mentioned in HADK.

Chapter 4 

cat <<EOF > $HOME/.hadk.env
export MER_ROOT="[insert value of your choosing]"
export ANDROID_ROOT="$MER_ROOT/android/droid"
export VENDOR="lge"
export DEVICE="hammerhead"
EOF
cat <<'EOF' >> $HOME/.mersdkubu.profile
function hadk() { source $HOME/.hadk.env${1:+.$1}; echo "Env setup for $DEVICE"; }
export PS1="HABUILD_SDK [\${DEVICE}] $PS1"
hadk
EOF
cat <<'EOF' >> $HOME/.mersdk.profile
function hadk() { source $HOME/.hadk.env${1:+.$1}; echo "Env setup for $DEVICE"; }
hadk
EOF

Chapter 5 

hadk
sudo mkdir -p $ANDROID_ROOT
sudo chown -R $USER $ANDROID_ROOT
cd $ANDROID_ROOT
repo init -u git://github.com/mer-hybris/android.git -b hybris-11.0
repo sync

Known Issues

  • dhcp assigns wrong ip address to host or not at all and it has to be fixed manually to be able to telnet to 2323 : 
ifconfig -a and look for the interface name through which Nexus 5 is connected to host
sudo ifconfig <interface_name> 192.168.2.10 broadcast 192.168.2.255
  • Lipstick crashes at startup if debugfs is mounted
    • TMP!workaround into your .ks %post section: 
rm -f /lib/systemd/system/sysinit.target.wants/sys-kernel-debug.mount
  • Lipstick crashes if qt5-qtsensors-plugin-sensorfw package is installed.
    • Workaround: zypper rm qt5-qtsensors-plugin-sensorfw
  • the two issues above can be worked-around at image creation time by the following changes in the .ks file : 
sed -i "/post$/a rm -f \/lib\/systemd\/system\/sysinit.target.wants\/sys-kernel-debug.mount"  $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks
sed -i "/post$/a rm -f \/usr\/lib\/qt5\/plugins\/sensors\/libqtsensors_sensorfw.so"  $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks  

zypper rr adaptation0 xt9
  • wireless hotspot is not working... wip? Workaround use usb tethering 
devel-su
echo 1 > /proc/sys/net/ipv4/ip_forward
/sbin/iptables -t nat -A POSTROUTING -o rmnet0 -j MASQUERADE
/sbin/iptables -A FORWARD -i rmnet0 -o rndis0 -m state --state RELATED,ESTABLISHED -j ACCEPT
/sbin/iptables -A FORWARD -i rndis0 -o rmnet0 -j ACCEPT

be sure on host the host you have a gateway setup to 192.168.2.1 and a dns eg. 8.8.8.8

  • mp3s do not play (google is your friend here.)
  • the usb-moded package is removed so you will not get the phone connecting via usb as storage. Workaround use telnet or ssh
  • if any zypper operation pulls usb-moded remove them with 
rpm -e usb-moded-0.80-1.11.1.armv7hl
rpm -e usb-moded-defaults-0.80-1.11.1.armv7hl
rpm -e usb-moded-diagnostics-config-0.80-1.11.1.armv7hl
rpm -e usb-moded-developer-mode-0.80-1.11.1.armv7hl
  • dmesg spammed by [22592.736003] init: process 'qrngd', pid 12549 exited

cause missing /dev/hw_random Workaround: create a new udev rule 

 /lib/udev/rules.d/999-extra-rules.rules

with content 

 KERNEL=="hw_random",NAME="hwrng", SYMLINK+="%k"

then 

 udevadm trigger
  • dmesg spammed by [36025.727614] init: process 'time_daemon' killing any children in process group

no idea wip?

  • boot races caused by funny rules in systemd... Sign: you are stuck with a google logo... Workaround.

add these in the %post of the .ks

sed -i '/post$/a sed -i \"s;WantedBy;RequiredBy;g\" \/lib\/systemd\/system\/system.mount' $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks 

sed -i '/post$/a echo \"RequiredBy=droid-hal-init.service\" >> \/lib\/systemd\/system\/local-fs.target' $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks  
sed -i '/post$/a echo \"[Install]\" >> \/lib\/systemd\/system\/local-fs.target' $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks

Failing Tests

  • test_camera 
Segmentation fault
  • test_egl 
Segmentation fault
  • test_glesv2 
Segmentation fault
  • test_gps 
[root@Jolla nemo]# test_gps
*** setup signal handler
*** get gps interface
*** device info
 id = gps
 name = loc_api GPS Module
 author = Qualcomm USA, Inc.
*** init gps interface
*** set capabilities
capability is 00000033
 ** Creating thread: 'Loc_hal_worker' (start=0xb6c44ad9, arg=0x13e6208)
 ** After thread_create: 'Loc_hal_worker', error=0 (start=0xb6c44ad9, arg=0x13e6208)
*** setting positioning mode
*** start gps track
*** gps tracking started
*** tracking.... 
**** Thread wrapper start (start=0xb6c44ad9, arg=0x13e6208) ****
Diag_LSM_Init: Failed to open handle to diag driver, error = 2*** status callback
*** session begin
*** status callback
*** engine on
*** status callback
*** session begin
*** nmea info
timestamp:      1741630708
nmea (29):      $GPGSA,A,1,,,,,,,,,,,,,,,*1E
*** nmea info
  • test_hwcomposer 
width: 1080 height: 1920
Segmentation fault
  • test_input 
Segmentation fault
  • test_nfc 
Starting test_nfc.
Finding NFC hardware module.
test_nfc: test_nfc.c:156: testNfc: Assertion `hwModule != ((void *)0)' failed.
Aborted
  • test_sensors 
Segmentation fault
  • test_ui 
Segmentation fault
  • test_sf 
Segmentation fault

Passing Tests

  • test_egl_configs
  • test_vibrator

Hardware Support

For current status of hardware support refer to https://wiki.merproject.org/wiki/Adaptations/libhybris

Help

If you need any help join us on #sailfishos-porters on irc.freenode.net

Retrieved from "https://wiki.merproject.org/wiki/index.php?title=Building_Sailfish_OS_for_Nexus_5&oldid=4559"
Personal tools