The Mer Wiki now uses your Mer user account and password (create account on https://bugs.merproject.org/)


Building Sailfish OS for Nexus 5

From Mer Wiki
(Difference between revisions)
Jump to: navigation, search
(Chapter 3)
(Scripts)
Line 194: Line 194:
  
 
=== Scripts ===
 
=== Scripts ===
* rebuilding the image. Use at your own risk. This script rebuilds a mic image. You have to sync the repo by hand. It boils down chapter 7 and 8 and assumes you have run and executed them once. If you have issues ping alin in the irc channel from above.
+
* an automatic way to build/rebuild all the image one can find here (ping dmt or alin on irc if you are in trouble with this):
dump the code below in $MER_ROOT in rebuild_mic for example
+
 
+
chmod 755 rebuild_mic
+
then just run it once in mer sdk. Script content below:
+
 
+
#!/usr/bin/env bash
+
if [ "$#" -eq "1" ] ; then
+
  dest=$1
+
else
+
  echo "Syntax: `basename $0` <destination folder>"
+
  echo "or `basename $0` <mernexus5>"
+
  exit 1
+
fi
+
export RELEASE=1.0.8.19
+
export EXTRA_NAME=-ame-$(date +%d%m%Y%H:%M)
+
pushd $ANDROID_ROOT
+
mkdir -p $ANDROID_ROOT/droid-local-repo/$DEVICE
+
rm -f $ANDROID_ROOT/droid-local-repo/$DEVICE/droid-hal-*rpm
+
mb2 -t $VENDOR-$DEVICE-armv7hl -s rpm/droid-hal-device.inc build
+
mb2 -t $VENDOR-$DEVICE-armv7hl -s rpm/droid-hal-$DEVICE.spec build
+
mb2 -t $VENDOR-$DEVICE-armv7hl -s hybris/droid-hal-configs/rpm/droid-hal-configs.spec build
+
mv RPMS/*${DEVICE}* $ANDROID_ROOT/droid-local-repo/$DEVICE
+
createrepo $ANDROID_ROOT/droid-local-repo/$DEVICE
+
isThere=$(sb2 -t $VENDOR-$DEVICE-armv7hl -R -msdk-install ssu lr | grep "file://$ANDROID_ROOT/droid-local-repo/$DEVICE")
+
if [ "x$isThere" == "x" ]; then
+
  sb2 -t $VENDOR-$DEVICE-armv7hl -m sdk-install -R ssu ar local-$DEVICE-hal file://$ANDROID_ROOT/droid-local-repo/$DEVICE
+
fi
+
sb2 -t $VENDOR-$DEVICE-armv7hl -m sdk-install -R zypper ref
+
rpm/helpers/process_patterns.sh
+
popd
+
HA_REPO="repo --name=adaptation0-$DEVICE-@RELEASE@"
+
sed -e "s|^$HA_REPO.*$|$HA_REPO --baseurl=file://$ANDROID_ROOT/droid-local-repo/$DEVICE|"  $ANDROID_ROOT/installroot/usr/share/kickstarts/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks >  $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks
+
HA_REPO="repo --name=adaptation0-$DEVICE-@RELEASE@"
+
HA_REPO1="repo --name=adaptation1-$DEVICE-@RELEASE@ --baseurl=http://repo.merproject.org/obs/home:/siteshwar:/hw:/hammerhead/sailfish_1.0.8.19_armv7hl/"
+
sed -i -e "/^$HA_REPO.*$/a$HA_REPO1"    $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks
+
sed -i '/%post$/a sed -i \"s;WantedBy;RequiredBy;g\"  \/lib\/systemd\/system\/system.mount' $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks
+
sed -i '/%post$/a echo \"RequiredBy=droid-hal-init.service\" >> \/lib\/systemd\/system\/local-fs.target' $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks
+
sed -i '/%post$/a echo \"[Install]\" >> \/lib\/systemd\/system\/local-fs.target' $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks
+
sudo mic create fs --arch armv7hl --tokenmap=ARCH:armv7hl,RELEASE:$RELEASE,EXTRA_NAME:$EXTRA_NAME --record-pkgs=name,url --outdir=sfa-$DEVICE-ea-$RELEASE$EXTRA_NAME --pack-to=sfa-$DEVICE-ea-$RELEASE$EXTRA_NAME.tar.bz2 $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks
+
mkdir -p $dest
+
cp $(pwd)/sfa-hammerhead-ea-${RELEASE}${EXTRA_NAME}/sailfishos-hammerhead-release-${RELEASE}${EXTRA_NAME}.zip $dest/
+
 
+
 
+
 
+
* an automatic way to build/rebuild all the image one can find here:
+
 
  https://github.com/dmt4/sfa-mer
 
  https://github.com/dmt4/sfa-mer

Revision as of 09:23, 3 August 2014

Download the HADK documentation from http://releases.sailfishos.org/sfa-ea/2014-07-21_SailfishOSHardwareAdaptationDevelopmentKit.pdf

This document mentions configurations required to build Sailfish OS for Nexus 5 (hammerhead). HADK should be followed as it is and this document should be referred only to learn about build configurations specific to Nexus 5.

HADK mentions references to CM 10.1 while Nexus 5 is based on CM 11. All the steps carried out in HADK should be in context of CM 11 only.

Contents

Chapter 3

Install CM 11 nightly (cm-11-XXYYZZZZ-NIGHTLY-hammerhead.zip) from http://download.cyanogenmod.org/?device=hammerhead instead of CM 10.1 on your device and test the functionality as mentioned in HADK. Last tested version was from 27th of July. Let us know if newer do not work.

Chapter 4

cat <<EOF > $HOME/.hadk.env
export MER_ROOT="[insert value of your choosing]"
export ANDROID_ROOT="$MER_ROOT/android/droid"
export VENDOR="lge"
export DEVICE="hammerhead"
EOF
cat <<'EOF' >> $HOME/.mersdkubu.profile
function hadk() { source $HOME/.hadk.env${1:+.$1}; echo "Env setup for $DEVICE"; }
export PS1="HABUILD_SDK [\${DEVICE}] $PS1"
hadk
EOF
cat <<'EOF' >> $HOME/.mersdk.profile
function hadk() { source $HOME/.hadk.env${1:+.$1}; echo "Env setup for $DEVICE"; }
hadk
EOF

Chapter 5

hadk
sudo mkdir -p $ANDROID_ROOT
sudo chown -R $USER $ANDROID_ROOT
cd $ANDROID_ROOT
repo init -u git://github.com/mer-hybris/android.git -b hybris-11.0
repo sync

Known Issues

  • dhcp assigns wrong ip address to host or not at all and it has to be fixed manually to be able to telnet to 2323 :
ifconfig -a and look for the interface name through which Nexus 5 is connected to host
sudo ifconfig <interface_name> 192.168.2.10 broadcast 192.168.2.255
  • droid-hal-init is sometimes started before /system is mounted and causes race condition with property service. Symptom: you are stuck with a google logo:
sed -i '/%post$/a sed -i \"s;WantedBy;RequiredBy;g\"  \/lib\/systemd\/system\/system.mount' $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks
sed -i '/%post$/a echo \"RequiredBy=droid-hal-init.service\" >> \/lib\/systemd\/system\/local-fs.target' $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks  
sed -i '/%post$/a echo \"[Install]\" >> \/lib\/systemd\/system\/local-fs.target' $ANDROID_ROOT/tmp/Jolla-@RELEASE@-$DEVICE-@ARCH@.ks
    • With all them workarounds above, some boots might still stuck nastily with journal looking only like this: https://pastee.org/6jf5x
zypper rr adaptation0 xt9
  • wireless hotspot is not working... wip? Workaround use usb tethering
devel-su
echo 1 > /proc/sys/net/ipv4/ip_forward
/sbin/iptables -t nat -A POSTROUTING -o rmnet0 -j MASQUERADE
/sbin/iptables -A FORWARD -i rmnet0 -o rndis0 -m state --state RELATED,ESTABLISHED -j ACCEPT
/sbin/iptables -A FORWARD -i rndis0 -o rmnet0 -j ACCEPT

be sure on host the host you have a gateway setup to 192.168.2.1 and a dns eg. 8.8.8.8

  • if usb-moded is installed you can use the sailfish os usb tethering (unfortunately is known not to work, fixed the package soon in repo)
zypper in usb-moded-connection-sharing-android-config
  • mp3s do not play (google is your friend here.)
  • the usb-moded package is removed so you will not get the phone connecting via usb as storage. Workaround use telnet or ssh
  • usb-moded may cause issues google logo stucked on screen for more tha 4 min... (have not seen them laterly). In this case remove them with
rpm -e usb-moded
rpm -e usb-moded-defaults
rpm -e usb-moded-diagnostics-config
rpm -e usb-moded-developer-mode
  • note that if usb-moded are installed ip of the device is 192.168.2.15, without them 192.168.2.1
  • note that if you want a working usb-moded you may want to install the follwing rather than the defaults pulled
rpm -qa | grep usb-moded
usb-moded-pc-suite-mode-android-0.80-1.11.1.armv7hl
usb-moded-connection-sharing-android-config-0.80-1.11.1.armv7hl
usb-moded-developer-mode-android-0.80-1.11.1.armv7hl
usb-moded-diagnostics-config-0.80-1.11.1.armv7hl
usb-moded-0.70-134.1.Nemo.armv7hl (ask phdeswer in the irc channel)
usb-moded-defaults-android-0.80-1.11.1.armv7hl
usb-moded-diag-mode-android-0.80-1.11.1.armv7hl
  • dmesg spammed by [36025.727614] init: process 'time_daemon' killing any children in process group

no idea wip? Workaround

in /init.hammerhead.rc look for time_daemon and disable it by changing this block

service time_daemon /system/bin/time_daemon
   class late_start
   user root
   group root

to

service time_daemon /system/bin/time_daemon
   class late_start
   user root
   group root
   disabled
  • while wireless connects to wlan unfortunately after reboot does not connect anymore to the configures network. Workaround. readd the network

Failing Tests

  • test_camera
Segmentation fault
  • test_egl
Segmentation fault
  • test_glesv2
Segmentation fault


  • test_hwcomposer
width: 1080 height: 1920
Segmentation fault
  • test_input
Segmentation fault
  • test_nfc
Starting test_nfc.
Finding NFC hardware module.
test_nfc: test_nfc.c:156: testNfc: Assertion `hwModule != ((void *)0)' failed.
Aborted
  • test_sensors
Segmentation fault
  • test_ui
Segmentation fault
  • test_sf
Segmentation fault

Passing Tests

[root@Jolla nemo]# test_gps
*** setup signal handler
*** get gps interface
*** device info
 id = gps
 name = loc_api GPS Module
 author = Qualcomm USA, Inc.
*** init gps interface
*** set capabilities
capability is 00000033
 ** Creating thread: 'Loc_hal_worker' (start=0xb6c44ad9, arg=0x13e6208)
 ** After thread_create: 'Loc_hal_worker', error=0 (start=0xb6c44ad9, arg=0x13e6208)
*** setting positioning mode
*** start gps track
*** gps tracking started
*** tracking.... 
**** Thread wrapper start (start=0xb6c44ad9, arg=0x13e6208) ****
Diag_LSM_Init: Failed to open handle to diag driver, error = 2*** status callback
*** session begin
*** status callback
*** engine on
*** status callback
*** session begin
*** nmea info
timestamp:      1741630708
nmea (29):      $GPGSA,A,1,,,,,,,,,,,,,,,*1E
*** nmea info
nmea (50):      $GPGSV,6,6,23,85,16,172,,71,79,298,,72,28,246,*42
*** location callback
flags:  63
latitude:       53.323554
longtide:       -6.252064
accuracy:       47.000000
utc:    -1817944088
*** nmea info
timestamp:      -1817945278
nmea (56):      $GPGSA,A,3,01,04,06,12,13,17,20,23,32,,,,1.9,1.6,0.9*32
*** nmea info
timestamp:      -1817945277
nmea (40):      $GPVTG,109.7,T,109.7,M,1.0,N,1.8,K,A*2B
*** nmea info
timestamp:      -1817945277
nmea (73):      $GPRMC,221529,A,5319.413254,N,00615.123869,W,1.0,109.7,010814,0.0,E,A*0A
*** nmea info
timestamp:      -1817945276
nmea (72):      $GPGGA,221529,5319.413254,N,00615.123869,W,1,09,1.6,-23.0,M,48.0,M,,*4F

Hardware Support

For current status of hardware support refer to https://wiki.merproject.org/wiki/Adaptations/libhybris

Help

If you need any help join us on #sailfishos-porters on irc.freenode.net

Scripts

  • an automatic way to build/rebuild all the image one can find here (ping dmt or alin on irc if you are in trouble with this):
https://github.com/dmt4/sfa-mer
Personal tools