Revision as of 11:51, 28 February 2012

This page describes how to contribute a patch to a Mer package and how to resubmit corrected patches.

Preparation

You'll need git and osc setup and an ssh key on the Mer gerrit server. You also need to be able to access a Mer.MDS project linked to a current Mer release on an OBS. This is called Mer:fake: on the MeeGo Community OBS.

Submit a change

Summary

Branch the OBS package in either your local OBS or the community OBS using the MDS remote link.
Checkout the package from OBS
Incorporate a bare clone mer/git package from Mer master repo into the osc directory.
Clone the mer/git package from Mer master repo (The OBS and mer/git package should be identical.)
Unpack the source and apply patches (usually in a local build root)
Optionally take a snapshot of chroot (for later diff)
Hack in chroot until ready (potentially needing to install new pkgs for new BRs)
Create a patch
Modify packaging
Submit to OBS to verify build
Build and test and image or other appropriate QA
Submit to gerrit for CI and review

Branch the package to work on it

osc branch Mer.MDS:Core:i486 systemd

A bug in the OBS means that the new branch project will not have the correct repos so add them manually. Even if you add them through the OBS web interface they will miss the arch field.

osc meta prj home:YOURNAME -e

  <repository name="Mer_Core_i486">
   <path repository="Core_i486" project="Mer.MDS:Core:i486"/>
   <arch>i586</arch>
  </repository>

The repository needs to be set to publish too.

Checkout:

  osc co home:Admin:branches:Mer.MDS:Core:i486/systemd
  cd home:Admin:branches:Mer.MDS:Core:i486/systemd
  osc build i586

Pull the latest Mer version from the gerrit git repo

Clone the git repo metadata into your OSC checkout using git's --bare option :

  cd home:Admin:branches:Mer.MDS:Core:i486/systemd
  git clone --bare ssh://your_username@review.merproject.org:29418/mer-core/systemd .git
  git config -f .git/config core.bare false

Check out the latest content from git:

  git reset --hard

Hack

You can now edit the code and packaging

Build

Of course you'll need to do one or more builds to verify the code in a cycle like this:

 specify *yaml
 osc build i586 *.spec
 osc chroot i586 *.spec

Then a server-side build:

 osc ar
 osc ci

Create image

Use a suitable .ks with mic2

If you use IMG, it supports a feature called "Extra repositories and packages". This allows you to use a standard kickstart and add a specific repository to use for overrides.

Select the OBS and enter the repository/repo eg:

 home:Admin:branches:Mer.MDS:Core:i486/Mer_Core_i486

Build a suitable image, install and test

Edit Changelog

In the obs/mer package directory:

  cd home:Admin:branches:Mer.MDS:Core:i486

If the version has changed or if you've otherwise edited the yaml file, re-run specify.

Make a note in the .changes file about the modification made.

If you are closing a bug then add a line like

- Fixes MER#XYZ : Summary of bug

Push for review

If this is a new change (ie it hasn't been rejected and corrected) then:

  git commit -s

When you're satisfied:

  git push gerrit HEAD:refs/for/master

You should get back a message like:

remote: New Changes:
remote:   http://review.merproject.org/XXX

This will now be scheduled for a CI build and test; then it will be manually reviewed and hopefully, accepted.

Re-submit if original change was rejected

If your changes is rejected for some reason (a frequent occurence) then you should address the issues and resubmit.

Summary

For Mer this is done by:

Address the issue
Finding the Change-Id
amending the commit
adding a Change-Id: line
resending the change

Address review issues

The gerrit tool is used to permit reviews of your code. If the change is rejected then the tool should have a comment explaining what needs to be done to resolve the issue. Make these changes and re-test your code.

Obtain Change-Id:

When you are ready to submit go to the gerrit page for your change

 http://review.merproject.org/XXX

In the top left is gerrit's Change-Id: field. Adding this to the commit message will allow gerrit to replace the original commit and retain a history of reviews and responses.

Copy the Change-Id: value including the text "Change-Id:"

Prepare an amended commit

The commit should now be committed using:

 git add <changed files>
 git commit -s --amend

and the commit message should have the "Change-Id:" as the last line after the signed-off line.

Push commit for re-review

Now push the commit to gerrit using

 git push gerrit HEAD:refs/for/master

New Packages

Occasionally a new package is required in Mer.

Summary

The process is similar to the normal contribution with some minor variations.

Build your package in the community OBS
Propose a new package on irc, mailing list or via a bug to Mer Core/.Project-core
Wait for the git repo to be created
Checkout your package from your OBS project
Prepare a git repo and add your code. Then do a signed-off commit.
Link your local git repository to the remote mer-core/gerrit repository
Push your code for review and CI

Prepare your new package

So having prepared and built your package on OBS, go to the osc package directory

osc co <PRJ> <PKG>
cd <PRJ>/<PKG>

Prepare a git repo

Then prepare the git repo (skipping the .osc/ dir)

git init .
git add *
git commit -s

Now add the Mer git repository (using your name/package)

git remote add gerrit ssh://<yourlogin>@review.merproject.org:29418/mer-core/<packagename>

A quick way to check all is well is

git remote update

Send for review

Finally, to push the new code and start a CI run:

git push gerrit HEAD:refs/for/master

You should get back a message like:

remote: New Changes:
remote:   http://review.merproject.org/XXX

This will now be scheduled for a CI build and test; then it will be manually reviewed and hopefully, accepted.

Removing / Renaming Packages

Mer doesn't yet have a process to remove or rename packages.

(aside: Any process must consider the impact on recreating releases that contain the package.)

Handling rejection

If changes are needed at this point, the code is already in gerrit so it follows the normal modification process above.

What goes wrong

There are a lot of ways to get package submission wrong. We're working on automatically detecting these but here are things to check:

Ensure you follow the Packaging guidelines especially for formatting, bug references and Mer versioning
Commit comments should have enough content to explain the issue - bear in mind the audience may read this message well in the future.
make sure all your files are added to git (currently git and osc can have different files under change control - 'osc ar' won't ensure they get added to git and sent for review)
Your package should be minimal - don't require or build-require packages you don't need
Your package should follow best practice - eg use PkgConfigBR where possible
Pay attention to rpmlintian (though we have not fully tuned it for Mer yet)

Feedback

The people reviewing your code (and yes, they are people, not sadistic monsters who enjoy laughing at your contributions ... apart from Sage) will try to give you concise and honest feedback.

Usually they'll address all the issues they see in the code so (provided no new problems are introduced) a second submission correcting the points raised should be accepted. Sometimes a second review will reveal issues missed the first time around - annoying but it happens.

Over time you will become more familiar with the review process and eventually you may start to comment on contributions yourself.

Contribution in detail

Revision as of 11:51, 28 February 2012

Contents

Preparation

Submit a change

Summary

Branch the package to work on it

Pull the latest Mer version from the gerrit git repo

Hack

Build

Create image

Edit Changelog

Push for review

Re-submit if original change was rejected

Summary

Address review issues

Obtain Change-Id:

Prepare an amended commit

Push commit for re-review

New Packages

Summary

Prepare your new package

Prepare a git repo

Send for review

Removing / Renaming Packages

Handling rejection

What goes wrong

Feedback

Views

Personal tools

Navigation

Search

Tools

@@ Line 23: / Line 23: @@
 == Branch the package to work on it ==
-  osc branch Mer.MDS:Core:i586 systemd
+  osc branch Mer.MDS:Core:i486 systemd
 A bug in the OBS means that the new branch project will not have
@@ Line 30: / Line 30: @@
   osc meta prj home:YOURNAME -e
-    <repository name="Mer_Core_i586">
+    <repository name="Mer_Core_i486">
-     <path repository="Core_i586" project="Mer.MDS:Core:i586"/>
+     <path repository="Core_i486" project="Mer.MDS:Core:i486"/>
      <arch>i586</arch>
     </repository>
@@ Line 39: / Line 39: @@
 Checkout:
-    osc co home:Admin:branches:Mer.MDS:Core:i586/systemd
+    osc co home:Admin:branches:Mer.MDS:Core:i486/systemd
-    cd home:Admin:branches:Mer.MDS:Core:i586/systemd
+    cd home:Admin:branches:Mer.MDS:Core:i486/systemd
     osc build i586
@@ Line 47: / Line 47: @@
 Clone the git repo metadata into your OSC checkout using git's --bare option :
-    cd home:Admin:branches:Mer.MDS:Core:i586/systemd
+    cd home:Admin:branches:Mer.MDS:Core:i486/systemd
     git clone --bare ssh://your_username@review.merproject.org:29418/mer-core/systemd .git
     git config -f .git/config core.bare false
@@ Line 79: / Line 79: @@
 Select the OBS and enter the repository/repo eg:
-   home:Admin:branches:Mer.MDS:Core:i586/Mer_Core_i586
+   home:Admin:branches:Mer.MDS:Core:i486/Mer_Core_i486
 Build a [[:Category:image|suitable image]], install and test
@@ Line 86: / Line 86: @@
 In the obs/mer package directory:
-    cd home:Admin:branches:Mer.MDS:Core:i586
+    cd home:Admin:branches:Mer.MDS:Core:i486
 If the version has changed or if you've otherwise edited the yaml file, re-run specify.