Revision as of 19:25, 27 March 2012

Vivaldi Tablet

Kernel

WIP

Kickstart

Download the following kickstart into your home accessible to the SDK

http://dl.dropbox.com/u/5715485/spark/plasmaactive-armv7l-c71-devel.ks

Build an Image

Install the Mer Platform SDK , http://wiki.merproject.org/wiki/Platform_SDK

Install extlinux, using the following command

sudo zypper install syslinux-extlinux

Use the following command line to build an image

sudo mic create raw plasmaactive-armv7l-c71-devel.ks -o . --pkgmgr=yum --arch=armv7l --logfile=spark-build.log

Pre-Built Image (23 March 2012) at http://dl.dropbox.com/u/5715485/spark/plasmaactive-armv7l-c71-devel-cardblksd.raw.bz2

Write to sdcard

sudo dd of=/dev/sdd if=plasmaactive-armv7l-c71-devel-cardblksd.raw bs=4M

Until the kernel is packaged you will need to add the following files to the sdcard image

Copy the following to the first partition

http://dl.dropbox.com/u/5715485/spark/zenithink-fat-2m.tgz so you end up with the uImage at the top level dir

Copy following to the second partition at /lib/modules so you end up with /lib/modules/2.6.34

http://dl.dropbox.com/u/5715485/spark/zenithink-modules.tgz

After untarring the files depending on which model you have put the following new kernel in the root of the boot partition, rename to uImage_cwm

http://dl.dropbox.com/u/5715485/spark/uImage_cwm_2m 
http://dl.dropbox.com/u/5715485/spark/uImage_cwm_1n
http://dl.dropbox.com/u/5715485/spark/uImage_cwm_1f

WiFi

su 
insmod /boot/8192cu.ko
exit
cd /usr/lib/connman/test
./test-connman enable wifi
./connect-service SSID password

I'll add the insmod to the next image