The Mer Wiki now uses your Mer user account and password (create account on https://bugs.merproject.org/)
Adaptations/PinePhone64
From Mer Wiki
< Adaptations(Difference between revisions)
(Created page with "=Hardware Support= =Instalation= ==Preparate SD card== ==U-Boot== ==Kernel== ==Nemo Mobile== ==Sailfish OS==") |
(→U-Boot) |
||
| Line 4: | Line 4: | ||
==Preparate SD card== | ==Preparate SD card== | ||
==U-Boot== | ==U-Boot== | ||
| + | |||
| + | === Clone u-boot (master branch): === | ||
| + | git clone github.com/u-boot/u-boot | ||
| + | |||
| + | === Compile u-boot === | ||
| + | |||
| + | export CROSS_COMPILE=aarch64-linux-gnu- | ||
| + | ARCH=arm64 make clean | ||
| + | ARCH=arm64 make sopine_baseboard_defconfig | ||
| + | ARCH=arm64 make | ||
| + | |||
| + | === Prepare you sd-card === | ||
| + | |||
| + | Copy to first sector on SD card: | ||
| + | |||
| + | sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/sdX bs=8k seek=1 | ||
| + | |||
| + | You can create a boot partition on the SD card with the first MB empty (used by U-boot), GParted -> EXT4 formatting, leave the defaults. I created 2 partitions: a small one for the U-boot stuff and other for maybe later the data. | ||
| + | |||
| + | === Manual load kernel === | ||
| + | |||
| + | Serial TTY Baudrate UART = 115200 for screen, example: screen /dev/ttyUSB0 115200 | ||
| + | You have to start screen first, before turning on the dev kit. | ||
| + | Interrupt the U-boot autoboot process when you see the message in the U-boot prompt. We need to access the U-boot prompt to load the Kernel image and boot it! | ||
| + | Kernel loading | ||
| + | |||
| + | ext4load mmc 0:1 ${kernel_addr_r} <IMAGE NAME> should be /Image | ||
| + | ext4load mmc 0:1 ${fdt_addr_r} /sun50i-a64-sopine-baseboard.dtb | ||
| + | |||
| + | Boot kernel | ||
| + | |||
| + | booti ${kernel_addr_r} - ${fdt_addr_r} | ||
| + | |||
==Kernel== | ==Kernel== | ||
==Nemo Mobile== | ==Nemo Mobile== | ||
==Sailfish OS== | ==Sailfish OS== | ||
Revision as of 11:15, 7 May 2019
Contents |
Hardware Support
Instalation
Preparate SD card
U-Boot
Clone u-boot (master branch):
git clone github.com/u-boot/u-boot
Compile u-boot
export CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 make clean ARCH=arm64 make sopine_baseboard_defconfig ARCH=arm64 make
Prepare you sd-card
Copy to first sector on SD card:
sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/sdX bs=8k seek=1
You can create a boot partition on the SD card with the first MB empty (used by U-boot), GParted -> EXT4 formatting, leave the defaults. I created 2 partitions: a small one for the U-boot stuff and other for maybe later the data.
Manual load kernel
Serial TTY Baudrate UART = 115200 for screen, example: screen /dev/ttyUSB0 115200 You have to start screen first, before turning on the dev kit. Interrupt the U-boot autoboot process when you see the message in the U-boot prompt. We need to access the U-boot prompt to load the Kernel image and boot it! Kernel loading
ext4load mmc 0:1 ${kernel_addr_r} <IMAGE NAME> should be /Image
ext4load mmc 0:1 ${fdt_addr_r} /sun50i-a64-sopine-baseboard.dtb
Boot kernel
booti ${kernel_addr_r} - ${fdt_addr_r}
