The Mer Wiki now uses your Mer user account and password (create account on https://bugs.merproject.org/)

OBS Setup

From Mer Wiki
Revision as of 16:36, 17 February 2012 by Lbt (Talk | contribs)

Jump to: navigation, search

Please check https://github.com/openSUSE/open-build-service for the latest setup instructions!

These steps show how to set up an Open Build Service (OBS) on an openSuSE 11.4 installation. An OBS installation will usually consist of an OBS web server, a main OBS server and one or more OBS workers. This document describes how to setup a basic evaluation installation and is not meant as production ready or hardened setup.

PLEASE NOTE : Most users won't need to install their own OBS and can just use an account on a publicly accessible OBS.

Vendors may need to have full control of their builds and keep source private due to licensing restrictions, etc. This guide addresses these special cases.

Contents

Pre-requisites

  • One or more physical or virtual machine with a minimal installation of OpenSuse 11.4 (12.1 is not recommended yet). It should be sysvinit based, not systemd.
  • Local DNS (or setup /etc/hosts on all relevant machines)
  • amd64 is normal but 686 should work

Add Repositories

Mer has a special version of OBS that it uses to enable SB2 and other features. Thes patches

First, we have to add the openSUSE Tools repositories to the OBS servers

Mer OBS 

zypper ar http://repo.pub.meego.com//Mer:/OBS:/Testing/openSUSE_11.4/Mer:OBS:Testing.repo

Suse Vanilla OBS 

zypper ar http://download.opensuse.org/repositories/openSUSE:/Tools/openSUSE_11.4/openSUSE:Tools.repo
zypper ar http://repo.pub.meego.com/Mer:/Tools/openSUSE_11.4/Mer:Tools.repo

The following repo is needed for the API/WebUI server (possibly not once 2.3 is released) 

zypper ar http://download.opensuse.org/repositories/devel:/languages:/ruby:/extensions/openSUSE_11.4/devel:languages:ruby:extensions.repo

The following repo is needed until 2.3 is released 

zypper ar http://download.opensuse.org/repositories/openSUSE:/Tools:/Unstable/openSUSE_11.4/openSUSE:Tools:Unstable.repo

Both

To activate them: 

zypper refresh

When zypper asks, accept the trust key.

Setup OBS Backend Server

For high load situations this can be split over multiple machines:

  • Scheduler Server
  • Source Server
  • Repository Server
  • Signing Server

alternatively this can all be done on one backend server.

Install the Server packages 

zypper install obs-server obs-signd

The repository server should have 

chkconfig --add obsrepserver

The source server should have 

chkconfig --add obssrcserver

The scheduler should have 

chkconfig --add obsscheduler obsdispatcher obspublisher obswarden

Finally, on the signer 

chkconfig --add obssigner

Configure access control to the reposerver : default is 127.0.0.1 Need to modify the ipaccess values. (see https://github.com/lbt/open-build-service/commit/477eeefb90c620333775c6be9b733329fbbdff7e for a fix that should make it upstream) 

vi /usr/lib/obs/server/BSConfig.pm

On the repository server: 

rcobsrepserver start

On the source server: 

rcobssrcserver start

On the scheduler server 

rcobsscheduler start
rcobsdispatcher start
rcobspublisher start
rcobswarden start

On the signer: 

rcobssigner start

Setup OBS API/Webserver 

zypper install obs-api mysql memcached apache2

chkconfig --add memcached obsapidelayed apache2 mysql

If you installed a minimal openSUSE installation then python packages may conflict with the minimal configuration package patterns-openSUSE-minimal_base. This package can be safely removed if it causes dependency problems.

NOTE: If you get following error: 

insserv: FATAL: service network is missed in the runlevels 2 to use service mysql

You need to edit /etc/init.d/mysql file and remove 2 from Default-Start: line.

MySQL Setup

Start mysql so we can configure it: 

rcmysql start

Secure the installation: 

/usr/bin/mysql_secure_installation

Create the databases: 

mysql -u root -p

At the mysql prompt create the databases and add the obs user to them (substitute ********** with your password): 

create database api_production;
create database webui_production;
GRANT all privileges
     ON api_production.* 
     TO 'obs'@'%', 'obs'@'localhost' IDENTIFIED BY '************';
GRANT all privileges
     ON webui_production.* 
     TO 'obs'@'%', 'obs'@'localhost' IDENTIFIED BY '************';
FLUSH PRIVILEGES;
quit

Now, configure OBS to use MySQL. First the API server: 

vi /srv/www/obs/api/config/database.yml

To have: 

     production:
       adapter: mysql
       database: api_production
       username: obs
       password: ************

And setup the webui to use MySQL: 

vi /srv/www/obs/webui/config/database.yml

     production:
       adapter: mysql
       database: webui_production
       username: obs
       password: ************

Populate the database: 

cd /srv/www/obs/api/
RAILS_ENV="production"  rake db:setup
cd /srv/www/obs/webui/
RAILS_ENV="production" rake db:setup

If this fails, check /srv/www/obs/api/config/environments/production.rb and /srv/www/obs/webui/config/environments/production.rb for configuration of the SOURCE_HOST and FRONTEND_HOST.

Setup Web UI Configuration

New edit the webui config: 

vi /srv/www/obs/webui/config/environments/production.rb

and set: 

FRONTEND_PORT = 444
FRONTEND_PROTOCOL = 'https'
DOWNLOAD_URL = "http://obs:82/"

Setup API Configuration

The api config: 

/srv/www/obs/api/config/environments/production.rb

Only needs editing if you are using LDAP or if your backend is not on the same machine as the api (frontend) when you should change the SOURCE_HOST.

Set options.yml

You may also need to edit /srv/www/obs/{webui,api}/config/options.yml to set

use_xforward
true
if you have a large setup and enabled X-Forward
new_user_registration
deny
If you use LDAP and create users elsewhere
source_server_url
http://src-*:5352
If you have setup the bs_srcsrver on another host

Setup apache for webui

Edit the apache config: 

vi /etc/sysconfig/apache2

Then add "passenger xforward headers" ( proxy? ) to the APACHE_MODULES= line

OBS and API uses SSL so you may need to create a certificate 

mkdir -p /srv/obs/certs/
openssl genrsa -out /srv/obs/certs/server.key 2048
openssl req -new -x509 -key /srv/obs/certs/server.key -out /srv/obs/certs/server.crt -days 3650

And verify log directory ownership 

chown -R wwwrun:www /srv/www/obs/webui/log/
chown -R wwwrun:www /srv/www/obs/api/log/

Edit the apache virtual host configuration. This can be tweaked a lot to setup sane named vhosts if you have DNS. 

vi /etc/apache2/vhosts.d/obs.conf

The packages install to /srv/obs, not /obs as the appliance uses so change <VirtualHost *:82> to have 

 DocumentRoot  "/srv/obs/repos/"

and 

 <Directory /srv/obs/repos>

Also enable https by adding: 

 Listen 443

Now start the server: 

rcmemcached start
rcobsapidelayed start
rcapache2 start

You also need to create the directory for the repos (TODO: What should be the permissions?) 

mkdir -p /srv/obs/repos


At this point you should be able to open a browser and go to your server and login to OBS. Normal https should be the webui, https on port 444 should be the api, and http on port 82 should be the repository directory. The default username/password is Admin/opensuse. Admin user should be able to create a new project in the List of All Projects -> Create a new project and filling in a project name, title and description.

Setup OBS Worker

Install the Worker Packages 

zypper ar http://repo.pub.meego.com/Mer:/Tools/openSUSE_11.4/Mer:Tools.repo



zypper install obs-worker qemu

Configure OBS Worker

Edit the file /etc/sysconfig/obs-worker in order to point to correct repository server which is one of the main OBS server services. In this example the server is 192.168.1.1. 

vi /etc/sysconfig/obs-worker

Most values in /etc/sysconfig/obs-server are well commented. One that needs to be set for ARM builds is: 

OBS_SCHEDULER_ARCHITECTURES="i586 x86_64 armv7el armv8el“

Start OBS Worker

Start the worker service: 

chkconfig --add obsworker
rcobsworker start


Troubleshooting

Note that logs live in:

  1. /srv/obs/log/ for the backend systems
  2. /srv/www/obs/api/log/ for the api and authentication interface
  3. /srv/www/obs/webui/log/ for the web interface

Here are common issues that have been seen and how to resolve them.

HTTP Error 500

Check /srv/www/obs/api/config/environments/production.rb and /srv/www/obs/webui/config/environments/production.rb for configuration of the SOURCE_HOST and FRONTEND_HOST.

404 while trying to see the package repository

Check, if the /srv/obs/repos directory is owned by obsrun.obsrun - if not, chown it. Failing to do so will prevent publisher from publishing your repositories in repository directory, and when you try accessing them you will get the 404.

OBS Web Interface Error:

When you get the following error: 

OBS Web Interface Error:
Error Details:

Errorcode: unknown
Message: <?xml version="1.0" encoding="UTF-8"?> <status code="unknown"> <summary>uncaught exception: Failed to establish connect

check all the modified OBS configuration files (.pm files) for missing semicolons (;). The trace should also be visible in /srv/obs/log/*.log files.

Retrieved from "https://wiki.merproject.org/wiki/index.php?title=OBS_Setup&oldid=1010"
Personal tools