Nemo/Updating

NOTE: There is no guarantee that the update instructions in this page work and that your device boots after the update. So it is recommended to backup all your essential data before doing the update.

Updating via Packages application

1. Make sure your device is connected to network
2. Choose "Refresh cache" button from the center of the toolbar
3. After cache has been refreshed choose "Update"
4. Packages creates a list of available updates (may take some time), choose "Update selected" (all should be selected by default)
5. System solves the dependencies and creates a list of packages that it needs to update and install, this may take long time. After the list is shown confirm update.
6. System downloads and installs the packages. Once the app shows "Finished" all packages have been installed. Now you can close the application
7. Reboot device

NOTE: This method doesn't download new packages that might have been added to the patterns, for this see the cmdline method.

Updating via command line

NOTE: If the network connection breaks and display goes black (See: https://bugs.nemomobile.org/show_bug.cgi?id=416) during the update give the device 15 minutes time to finish the update and after that restart the device manually (removing battery, holding powerbutton, or similar).

To update Nemo image you need to have Nemo installed and need to have internet connection enabled. When device is connected to the Internet open terminal and run following commands:

# Take root permissions (standard pasword for root is: nemo)
su 

# Update the repository database
zypper ref

# We run the update inside screen so that if something breaks (UX or network it doesn't get interrupted)
zypper install screen

# Start screen, this makes sure that even if for example Xorg crashes during update the update doesn't stop in the middle
screen

# Start update process
zypper dup

# At times there are new packages introduced in the patterns that are not installed automatically,
# thus following command is needed to get rest of the stuff.
# Here <DEVICE> is n900, n950, x86-generic or x86-vm
zypper install -f -t pattern nemo-<DEVICE>

# After update reboot the device
reboot

SSU

gst-nokia-camera problem [13/6/2013 N9/N950 only, N900 users choose solution 2 instead]
If you experience this error (version irrelevant):

Problem: gst-nokia-camera-0.57.0-3.2.Nemo.Adaptation.N9xx.armv7hl requires libgstphotography-0.10.so.0, but this requirement cannot be provided

REMEDY: perform *all* of these commands to fix (it will switch your system to 'rnd' devel!):

ssu re -r latest; ssu fl devel; zypper ref; zypper install ssu ssu-vendor-data-nemo; zypper ref; zypper dup

Nemo has adopted ssu which handles the repositories. These repositories are currently divided into two groups, release and rnd:

• 'release' repositories are using repos from http://releases.nemomobile.org/snapshots/repos/ which are static and published every now and again, when there are new tested changes
• 'rnd' repositories are live OBS repositories which are dynamic and constantly changing, these repositories are available at http://repo.merproject.org/obs/nemo:/.

To check that ssu is installed and which version you have call

rpm -q ssu

SSU version < 0.31

Old SSU isn't supported anymore. To update to new ssu do following:

zypper ref
zypper dup
zypper install nemo-ssu-repos-rnd
zypper ref
zypper dup
ssu ur
zypper ref
zypper dup

After this follow the guide for newer ssu.

SSU version 0.31 and newer

In new ssu versions the repository handling was merged to the ssu itself.

Choose either the 'release' repo

ssu re latest

or the 'rnd' repo

ssu re -r latest

'rnd' requires you to select the flavour:

• devel - bleeding edge, latest features straight from source code changes, along with all the new bugs :)
• testing - cutting edge, less instability
• stable - currently not used

What's your flavour? Choose via `ssu fl FLAVOUR e.g.:

ssu fl devel

Final steps

Next thing is to update the repository files. This is done by calling.

ssu ur

After this you should have repository files at /etc/zypp/repos.d/ssu_*.repo

Now you can continue the zypper usage as before.

NOTE: Whenever you change between 'release' and 'rnd' with `ssu re` command you need to call `ssu ur` or the repository files will point to the previously selected version.

NOTE: Changing between 'rnd' and 'release' or between different flavours in 'rnd', some packages will be at times older so "zypper dup" will also notify you about downgrading packages. As long as you know about the changes you are making this is usually a safe operation.

Known Issues

• When doing update the network connection might break if the connman is updated see https://bugs.merproject.org/show_bug.cgi?id=141
  • WORKAROUND: Do update inside screen